Gliders > Slope Soaring
Quark 2M - Back to cutting innocent trees!
erwan:
Hello
Today, i test Ronan's Quark ..
It's very funny and not very difficult to pilot.
I think to order a short kit for september :D
Fred:
--- Quote from: "miki.r" ---Hi again,
i already started the fuse - build is really simple compared to some other projects i built. The only thing i was thinking about was top and bottom sheeting of the fuse and balsa grain direction. Will the construction be more rigid with cross or straight grain balsa? In the curved front sections cross grain would also be much easier to bend...
--- End quote ---
Very good Miki! :clap:
You'll see, dead easy and quick to build! :D
You are right for the sheeting, better to do it this way.
By the way, if you want a more "rounded" fuselage, you can replace the 5x5 strips by 10x10 (square or triangle), that will give you more material to sand.
But that doesn't matter much, just a question of taste :D
And don't hesitate to send us photos of your build! :D
Fred:
--- Quote from: "erwan" ---Hello
Today, i test Ronan's Quark ..
It's very funny and not very difficult to pilot.
I think to order a short kit for september :D
--- End quote ---
Howdy Erwan :D
Yeah, that's the thing, everybody who tried the Quark, want one! :D
So, tested all the aerobatic manoeuvers in the book? :D
erwan:
One fly, many manoeuvers. I love half right roll and 2 quarter left roll. Maybe the same wing cover plywood 0.6 give less flexibility ^^
alibodin:
Richard,
Thank you for the extra componets list. Just need a kit now.
AListair
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version