Gliders > Scale

ASH25 - 1/4 scale

<< < (4/9) > >>

orionis:

--- Quote from: "Fred" ---Je suis pas tibulaire, mais presque  :mrgreen:

(can't translate that!)
--- End quote ---


"I'm not tubular, but almost", tu vois, c'est fastoche, l'anglais...
Bon, c'est sûr qu'à comprendre, c'est une autre paire de manche. Tiens, "une autre paire de manches", tu sais d'où ça vient?  :lol:

the Pope:
:lol: J adore cette traduction..............dommage qu'elle ne vienne pas de moi.......... :D

Fred:
Ok, finally some decent temperatures in the garage last week!
Time to do some resin!
Finally my spars are done in the wings. 5mm vertical spar carbone tape wrapped, plus the gap filled with carbone tow the entire lenght of the wing.





I always put some cling film on top of the work, just in case  :roll:

And everything is bagged



Cook for 24 hours, and I now have a very strong set of wings!
They are the interior panels of the wings. Another 2.5m is missing to get the 6,5 metres  :D  I'll try to have the external panels done this week end.

So next : Wing joiner box to be glued at the root on the spar, wing joiner box at the tips, and time to do the sheeting. I will do eveything in one operation, just need the temperatures to go up again now!  :!:

Go on Keith! Get started on those Mu28 wings!  :P

mario:
quoi , l ash n est pas pret pour ma venu  :cry:  :wink:  :mrgreen:

Fred:
:(  Trop froid pour la resine en ce moment, et j'ai pas d'étuve  :!:

Navigation

[0] Message Index

[#] Next page

[*] Previous page