Gliders > PSS

A4 Skyhawk

<< < (2/2)

Alan_Perse:
Thanks Keith, Pope and John. I'll get started on the weekend. I'll post pictures when I can.
By the way John, did you use the glue supplied with the kit or something else? Also did you close off the jet air intakes or did leave them open?

JohnPearson:
Hi Alan

I used foam friendly cyano  for most of the build, and a hot glue gun for the wing joining and fixing in the servos. As for the air intakes, YES cover them with tape, I used clear tape, also add some tape under the wings and fuselage to protect the foam on landing.

You will have to add some ballast ( lead) at the Cof G position, so make a small cut out under the wings. I will check my model and see how much lead is required, this will help the model fly better of the slope.

Navigation

[0] Message Index

[*] Previous page