Gliders > Scale

33% Kaiser Ka-3

<< < (5/22) > >>

selleri:
Wing has been sheeted.


Countersinking the elevator hinge hole.


Nice and tight.


Servo hatch in the elevator

selleri:
Last days have been spent on the second wing half, so nothing new there.

I've installed the wing tube, cut some hard wood in the gap between the spars and the tube, then glued with epoxy with fibers and microballons. Also added share web to the spars, should be bulletproof!


Same in the fuselage.


The plane has been used quite a lot on the leading edge.


Servo hatch in the wing.

selleri:
Picture my mate took when I was doing the wing tube.

selleri:
The wing struts need to attach to something


Every little bit helps to get a better mechanical join.


Then we install the plates in the wing.


And the fuselage.

selleri:
Hardwood was sanded to an airfoil shape, center drilled and then glued into the alu. strut.


Voila, rinse and repeat for the other wing!

Navigation

[0] Message Index

[#] Next page

[*] Previous page