Gliders > Scale
33% Kaiser Ka-3
Happy Days:
Thanks for those first two pictures Selleri. I was beginning to get an inferiority complex. I shall sleep much better now. Hmmmm zzzzzzz.
K.
selleri:
No problem Keith! :lol:
Added plywood on either side as I need a bit more material for my skid.
Ashlok/Molex connectors keep us plugged in.
Heatshrink on joins.
Equipment plate in the wing area.
Magnets will be used to attach the dashboard.
Then it's on to cutting some plastic.
Three sides ready for some fun.
Primer is sanded off where the canopy plastic is glued to the frame.
Then we apply some glue and wait for it to dry.
After it has dried it's time to get more precise for application of the internal seam. Syringe, silicone tube and a molested q-tip.
Voila!
johnfireball:
Hi Selleri,
Nice work. Is that an orange reciever I see in there, some of them are only suitable for park fliers, range is limited to 300 meters. I would be wary of using one in your masterpiece.
John.
selleri:
Cheers John, no worries it's just for the setup work, don't want any dust on my fancy rx! :lol:
Guide for the dashboard.
Dashboards fastners being glued in.
All the plastic is glued in but I still need to glue the insides of the sides.
Alan_Perse:
Great work Selleri. Those Ashlok connectors look very useful. Where can you get them?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version