Gliders > Scale
33% Kaiser Ka-3
Fred:
Ok thanks :D
Did not knew that one, have to try! :D
selleri:
Yeah, good stuff, I use it almost exclusively on different material bonds. Wood to fiber, plastic to metal, wood to metal, metal on metal(back cross piece in canopy).
selleri:
Skid ready for covering.
List added under the top sheeting.
Magnets to keep the tail attached.
Sometimes you need specialised tools. ;)
The backbit getting some sanding done.
Servo plugs added from the tail section.
selleri:
Almost there...
selleri:
Over the course of the build I've been wondering if Fred had made an erreur but turns out he got it right, shame on me for doubting you mate! :oops:
The covering will need something to adhere to around the strut attachment points.
More gluing area aquired.
Next up, gluing the top piece.
And cut it open after the glue dried!
Getting there.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version