Gliders > Slope Soaring
Le trip to Le Menez Hom
Fred:
Irish in heart!
And Alcoholic, so that qualify you :lol: :lol:
Keith:
What did you get the trophy for fred ???
Fred:
Ok, so, the event now... :D
We were 6 to travel to the 20th Menez Hom meeting from Ireland.
The annual Menez Hom meeting is a meeting dedicated to what we call the GPRs (Grands Planeurs RC - Big RC Gliders) and all you need, is a 4m+ glider to participate.
Gliders pit is made of 99% of scale gliders, and you have the odd alpina 4001, 5001 and some other machines that do the 1% left.
This year saw 50 pilots, from 4 different nationalities (France, Belgium, Germany and Ireland) with 80 gliders at anyone time on the pit at the slope (don't know the total of gliders, but well over 200 seeing the amount of gliders that were not put off the vans on the car park!)
Conditions were, let's say, challenging! Big winds, but unfortunately, not straight on the slope, but from the left, coming from the "petit Menez" for the one who knows the slope. So that's a lot of turbulences on the lower layer, but plenty of lift in front of us.
Landings were the big discussion on the day, with, for some weird reasons, 99% of the landing approaches were made on top of the car park, the public and the glider pit! When you have a 7m machine 2m from the cars and the public, this is quiet a sight! No clue why this was advised to be done that way, as there is at least 20 football field of space to land a glider on top of the slope! So we decided for a short landing path instead and land in front of us. Easier and safer!
Oh, and with Ronan, we were doing them in tandem with our 2 ASW15. On the spot each time and applauses from the pit :clap: :D
We are not that bad :lol: :P
Same way taken by the rest of us, and I am happy to report that we did not had any landing incident (Ok, I broke one of my rudder link on the Pilatus on the first landing! And that's a 20Kgs steel wire! Don't know why, as the landing was fine, but if you think that built up rudders on big models are too weak, think again! I was sure that the rudder will give up before the steel wire! I guess there was a weak spot were I crimple the wire, but the cut is slightly further up the line... Weird!)
Talking about gliders, I am happy to report that the Pilatus B4 flew great! First flight was a non event, and at 6Kgs, very light! (maybe too light!)
The Crystal is now trimmed after I modified the servos etc, so all good. 12kgs in the air is a nice sight, and thanks for that in the big wind we had!
ASW15.. Well, that's the asw15! :lol:
Ronan flew is Pilatus B4 and his ASW15, Ralph his KA8b, Kevin his Bergfalke, Les his Solution, and finally John, flew his ASH26, Minimoa and got lots of interest in the Fouga Magister with some nice flying.
Can be proud of the Irish team! :D :D :clap: :clap:
All in all, a very nice event, a good bunch of friends, and if you want to see some big machines, this is one of the place to be!
More later about the trip :mrgreen:
Happy Days:
What an amazing bunch of photos! And a couple of nice vids as well! :clap: :clap:
I found your ‘report’ very interesting Fred, thanks. But tell me. :?: If there were fifty pilots, all with planes of at least 4mtr span, how was the flying controlled? Surely there couldn’t have been more than three, or at most, four models in the air at any one time. Were the pilots allotted flying times each or something?
Very impressed with you & Ronans’ spot landings. 8) I always say that you can tell a good pilot by their landings. ( I’m just grateful to get my planes on the ground in one piece!)
Strange that you had a rudder cable that snapped for no apparent reason, and I’ve had a servo arm that broke recently, also for no apparent reason!
K.
johnfireball:
Hi all,
Great pics and vids, seems like ye had a ball. Fred for 2 pack paint try Waller & Wickham in Baldoyle ind est. They supply paint, epoxy and heavy glass for marine use. Its not cheap but good quality.
John.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version