Techniques > How to...

Foam Sheets

<< < (2/4) > >>

Fred:
Howdy,

There is one in France alright:

http://www.polymodel.fr/products/fiche-8/epp-noir-et-blanc-20grl/

They also have 30g ones and prices are decent.
Never tried them, I only used one in Germany, but I cannot remember the name!  :!:  I'll put the link as soon as I remember!

Also, there is a bigger one for EPP in France (EPP Supplier) called GT if I remember, but you need to order something like 100Kgs of the stuff, but works very cheap (good for group buy)

stephen.shannon:
This may sound stupid but....

I called B&Q today, they have 8' x 4' sheets of foam board, 50mm or 75mm thick, can tat be used?

billscottni:
If it's white foam Stephen make sure it's virgin foam and not recycled. Recycled has little lumps and imperfections which make hot wire cutting a nightmare.

Blue, pink or Knauf and it'll be fine

stephen.shannon:
I bought a small sheet to try. It looks fine on the outside, clean and uniform. It was only €6 for a 50mm x 1.2m sheet. We'll see

billscottni:
Should be a uniform colour and bead size throughout. Any lumps and colour flecks and it's probably recycled

Navigation

[0] Message Index

[#] Next page

[*] Previous page