Gliders > The French Corner
fouga
Fred:
@ John: Ronan wants to know if it leave it like this, or that need to go deeper into the fuselage (the wooden support).
Photos of yours in this area?
JohnPearson:
Hi Fred/Ronan
Complete and install the wings first, as they will act as a guage for the V-tail alinement.
As for the V-tail support, the bottom of the block sits on the bottom of the inside of the fuselage at the tail, any ply sticking up from the v-tail support slot, can be removed when the block is glued in place.
To get the correct v-tail alinement, place a strip of wood across the top of the two fins, and move the ply wire block, forward/back or side to side, to get this strip of wood level or horizontal with the wings looking down the nose of the fuselage see pic:
Fred can you translate for Ronan!
mario:
mise en place des boites a servos
mario:
le suport de stab est collé
et les servos d ailerons sont fixés :mrgreen:
the Pope:
Bon, va falloir que j ouvre ma boite............
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version