Techniques > Misc

MPX Green plugs mold from Steckerform

(1/2) > >>

Fred:
A quick "test" of the MPX Green plug mold from Steckerform :)

http://www.gliderireland.net/index.php/techniques/mpx-plug-mold

manolo torres:
A very interesting tool.  :) :)
Thanks Fred

mario:
I want one  8)

supercub:
just got my self some XT60 molds been looking for some like this for ages
 8) 8)

EI1638:
I'm obviously a tightwad. My preferred power connectors are Deans (T style) and I use 12.7 mm heatshrink. If the wires are a bit thin a few slivers of hot  glue into the back of the connector before applying the heat gun fix that. 12.7 mm heatshrink is just big enough to fit over the body of a Deans connector.

12.7 mm is the diameter before shrinking just so there's no confusion. In my opinion, since the heatshrink is snug around the body of each connector half, it provides good strain relief when 'pulling the plug'.

I can see the attraction of the MPX green connectors for that big glider I keep building in my dreams though.

Navigation

[0] Message Index

[#] Next page