Gliders > Slope Soaring

Build attempt / learning process

<< < (10/10)

Joyplanes:

--- Quote from: AndyB on November 20, 2020, 17:53:03 PM ---It's definitely for the slope.

This is all a bit new to me, technique and materials so it is not perfect, but highly enjoyable.

I started by cutting out the fuselage profiles and then using a hotwire to get the rough shape. I then drilled some rods into either end to add strength and make a sort of rotisserie arrangement for later. Filed the rough shape further and then sanded.

--- End quote ---

That's a nice built, where do you get that foam?

AndyB:
I actually got it from a neighbour who was have exterior insulation installed. It was 300mm closed cell styrofoam and was stronger than others I tried. for example, it resisted me poking my finger at it where other foams seemed to compress and collapse. I don't know if it's the best stuff to use, but it was free and worked well for me.

rogallo:
Andy,
  looks great, cannot wait to see it flying on the hills.

R

AndyB:
I've got Mt Leinster for the 28/29 in the calendar, see you then

Navigation

[0] Message Index

[*] Previous page