Techniques > How to...

DIY Vacuum Forming Machine

(1/2) > >>

Alan_Perse:
Hi All,

I though I would share some photos of a home made vacuum forming machine I'm building to make a canopy for my Skylark 2.
The Skylark has been pretty much ready to fly for quite some time, it just needs a canopy.
The first few photos are of the vacuum box. The last two are for the frame that will hold the plastic.

rogallo:
Looks good  Alan, keep up the good work and show us pics of the finished product.

Bill Scott and JP, any idea where you can get acetate for forming the canopy?

Alan_Perse:
Thanks Ralph. The vacuum forming machine is pretty much finished. I just need to finish making the plug for my canopy, and a I need to get some clear acetate. The vacuum box is 30cm x 30cm so any sheet that I can get that’s bigger than that would be great.

Alan_Perse:
Hi Guys. Just an update on my Vacuum Forming Machine.
I managed to source some PETG Clear plastic, 0.5mm thickness.
It took four attempts but I managed to form a canopy for my Skylark 2, see below.

Peter:
Looks great Alan. Well done!

Navigation

[0] Message Index

[#] Next page