Gliders > PSS

SU25 Frogfoot

<< < (12/13) > >>

JohnPearson:
Hi Bill

Looks good, you we have to show me how that system works, the wings look perfect, good job!!

billscottni:
No problem John. It's definitely not rocket science and mine is a very Heath Robinson set up :wink:

I have  small computer program that calculates the attachment points depending on the taper of the wing and its chord. After that you set it up, put the bow in place, turn on the heat and leave it alone until it's finished the cut  :)  :)

billscottni:
Bit more work done in the last week. Wings are now sheeted, little bit of glass and CF tow at the trailing edge to allow me to sand to a thin TE



 I also finished the sheting on the fin and tails. Tails have a surface finish of tissue and polyurethane varnish, which will hopefully take paint well :?:


John appeared the other night with a little pressie for moi. A tucano that had been built for a small power plant in the nose. That's now removed and the nose is being faired in



Needs a bit of a refurb, but I should have both models ready for the PSS event

After all this work, the shop is not as tidy as it could be!!!

Fred:
Looking good Bill !  :clap:  :clap:
Like the Tucano too !!

Fred - Just realised that he seriously need to remove the fingers and start to do a PSS !!

billscottni:
You'd better Fred, by my count 17 days to go :D

Navigation

[0] Message Index

[#] Next page

[*] Previous page