Techniques > Radios

Wing Setup

(1/2) > >>

error404:
Hi all,

I am putting together a flying wing and just got stuck at this (simple) problem.

When i push the stick up, the right aileron moves up and left aileron down and opposite when stick is pushed left!
When i push the stick left, both ailerons go up and opposite when pushed right!
I do not plan on flying with my optic 6 sideways :)

What is the best solution i could try for this? I did not have time to try anything yet but will do over the weekend, read the manual again.

Using Channel 1 for right servo and Channel 2 for left servo as suggested in manual, also not using v tail mixer but have one if i need it.
Ta

Anthony

Alan_Perse:
You will need to use a delta mixer. Thats a mixer specially made for flying wings. The  mixer is probably programed into your transmitter already, you just need to turn it on. I assume the Optic 6 transmitter has a delta mixer.

error404:
Alan,

It mentioned to switch on Elevon Mixing which i did.

I will check tonight for the delta mixer, i'm sure the function is on it.

Thanks

Alan_Perse:
I think the Elevon mixer is the same as a delta mixer. If thats the case may be the servos are connected to the wrong channels.

error404:
I will try that.  :oops:

Navigation

[0] Message Index

[#] Next page