Gliders > Slope Soaring

zagi si reinforcement

<< < (3/3)

Happy Days:
Yea, they’re great fund aren’t they Luke. They can take a fair bit of punishment as well.

Personally I found using dual rates was very handy. Low rate for light conditions, High rate when there is “Loads o’ Lift!”

If I may, Luke, I’ll give you a suggestion…………..fit different control rods,………ones with a double bend in each one. (As you’ll see in the picture of my old one)
The reason for the bend is to act as a shock absorber. The idea is that if  (or should I say When) the model has a hard landing the bend in the control rods will help to stop the servos from being jarred and possibly stripping the gears.

Your's is a lovely model, I’ll look forward to knocking it out of the sky one of these days! :twisted:  (Or not,….as the case me be! :lol: )



Keith

luke:
thanks for the tip keith ..............  they are bit of a pain to launch though...............grab it by the nose twist your arm around and fling !!!! im found that kinda hard .................... yeah no bother kieth , looking forward to mixing it up with ye real soon  :twisted:

Navigation

[0] Message Index

[*] Previous page