Techniques > Misc

CNC Machine

(1/1)

Fred:
Hi there,

So, the time has come to present you my CNC machine.
Look scary at a first look, but this is really easy to build if you take care of what you are doing !
The machine is fully built using hollow steel bars (God, that's heavy !), and use a belt system for the driving. Precise to 0.01mm in theory !
Speed ? well, I can cut up to 50mm/s (can do more, but the stepper motors are not following !), but in practice, I cut balsa (any thickness) at 30mm/s and plywood at 10mm/s. You can't go back to the old fashion way after that ! :rolleyes:



For more info : http://gliderireland.modelisme.com/cnc.htm

And if you have any questions, don't hesitate ! :)

Fred

Alan_Perse:
:shock: Looks great  :D . Are you going into kit production  :) .

Fred:
Hi Alan,

I think yes  :D
I do the Ka3 first, then.. We'll see !  :wink:

Fred

Navigation

[0] Message Index