Quadcopters / Drones / Helicopters / Rotary wings stuff > Electrics

Giros

<< < (2/2)

Ron:
Hi Nando,

Thanks for that it explains it all.

So the sensor gives a voltage proportional to the rotation 'speed' (degrees/sec) and the gyro turns this into the required signal to the servo, depending on what sort of heli gyro it is (dampener or heading say).
I guess in the heading hold gyro the internal processor is storing the total angle turned, from the angular speed/sec, and activates the servo until the gyro/model has turned the same distance in the other direction.

Now I understand what's going on  8)
I think  :?:

Thanks again :clap:  :clap:

Ron

Navigation

[0] Message Index

[*] Previous page