Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - _sOnGoKu_

Pages: 1 [2] 3
16
 hi friends, here i have recorded one video of my aosenma  at mid-flight  :)   holding with no problem one acition cam .

https://www.youtube.com/watch?v=0_0JTDTS9Dc

have a nice weekend :)

17
Hello friends, I open this thread to introduce the last Syma that has joined my fleet.
I was curious by several things in and out of time that I did not give a blast with a syma, so here it is. After test it I can say that without a doubt Syma is still
a good reference in terms of "toy" degree quadcopters, great drones to learn, soft to carry and with options already ,*nice developed.



This quad will delight those who know and those who want to learn to fly. Clearly this is above many of its competitors, with a nice red Metallic, some round lines
and modern looks great to the eye. The controller more the same, with a design according to the dron, in a nice white with Details in chrome red and quality finishes on all sides.

This dron weighs is little and its engines although they are powerful, hardly cause some damage, which makes it very good option for the little ones or beginners.
Also, one of the coolest things about this dron is that it can be piloted directly from a mobile phone easily making use of its native suyma app. Which by the way
works really well.

Well before going into more details about this dron Syma X5WU I show you what the box brings.

Video unboxing:
https://www.youtube.com/watch?v=5f-FuBRCFOI

Package Contents:
1 x Quadcopter,
1x USB Charger Cable
1x spare propellers
1x phone holder
1x screwdriver
1x transmitter
1x x card reader,
1x video photo camera (with 4G TF card)
1x User Manual (English + Chinese)



The Dron:
Well the truth that this dron does not leave indifferent the owner, syma has been a pioneer in the section of drones "toy type" and that shows, have gone a Little
of the typical line that took so long the x5 having.. in this model, the lines are round , and hey! they do not look bad, I like it, also like its red Metallized colorm ,
beautiful to the eye and to the touch, the materials of construction are of quality, in plastic well painted resistant. Propellers are soft it does not have very big power then
is dificult to be damaged in a fall. Bring a nice control what preftecly match with the drone, good quality at touch as well. Better than other competitors,
I think as a whole drone, it's nice. Just like the presentation in the box.



FPV by wifi:
Well, here this seems to have been improved! The app works quite well and one of the things I like most about this camera is that it has its own SD, Which in addition
to making things much easier, because I think it improves notably the performance of the set in question. Do not record badly to be a 2mp camera, But let's be clear,
you're not going to record a movie reportage with it if that's what you expect. As a toy with this feature it is interesting and above all else Always is nice to see the fpv
of the camra in the mobile.

Height Control:
Well here I have guive congrats to the development of syma, This function is noted that it has already dominated, and the dron maintains its height (even position in-door)
perfectly, it is easy to fly by itself, but with this function, almost anyone even inexperienced can enjoy a flight easily.

Headless mode,
If at the height control we add a headless mode that works wonderfully, we are before a prefect dron to begin in the flights. Easy to fly in this mode.
It is also useful if the dron is far away and the orientation is lost. It is easier to bring it back.




Phone app moivi:
As I mentioned above this soma x5uw can be controlled in several ways, one of them is directly from your phone, even in this mode, There are several options, being able
to control it with the gyroscope of the phone or on the virtual Sticks of the screen. The truth that very entertained and accomplished way to use it. Each time these things
work better with the app, although they still lack a little, but is fun.
The app, has many options, such as video record button, view the dron fpv, land, take off or even you can mark a way to follow , "flight plan" by painting with your finger,
the trace you like the drone follow.
Do not get confused, this dron has no gps, so it's all based on calculations on the dron and the cell phone / contorller .
This option is fun, although I recommend using it in a clear site, if something happens or the dron goes to another site, you can easily get it back.
The app is free and is ready to download.

Auto takeoff and lande.
Well, like most drones that keep the altitude as this syma x5uw has the optiions to land and take off alone. Little more to say, With a click, it has it in the air and vice versa
to land. I personally do it in manual mode normaly.

Automatic return home
As not, this dron has an automatic homecoming, which works really well, if it is matched as it should and the pilot respects the initial positons from the first blind was done.
A click and it will come to you, useful sometimes, dangerous in others, this option is recommended to practice in an open space the first Times until their operation is well understood.



The command:
One of the coolest things about dron is that it can be controlled in 3 different ways, with the nice command that comes with it, with an app and a mobile phone or both
At the same time (telephone and command) The second option is perhaps a little more difficult to learn to contol, but I would say that anyone who knows how to fly minimally
With the command should not have problem in making it fly with the phone. "It's all a matter of practice".

Two speeds
The drone has two forms of flight, one more calm and one more aggressive (advanced) in this last, an experienced pilot can fly quite fast. It's a light dron
And on a day without wind, flights can be made at fairly long distances.



The battery:
The battery, I have to say that in my opinion, this is perhaps the worst point that this dron has. Well, the duration and the system that use, I do not like it. it mount a
battery Of 3.7V 500mAh, which does not give much time flight if we use the camera, I have taken a flight time of about 5 to 7 minutes. To begin with, we already have the
problem that Generate these kinds of systems, you have to buy the original replacement to be able to lengthen the flight time, and that's because I personally do not like it.
In addition, the flight time of those batteries have nothing to envy the normal ones that use my other sum of all life.

Here I leave a short list of what for me are its pros and cons of this syma

Pros
Good finishes
Can be used with a mobile phone (without remote control)
It has camera with own SD card

Conts
Battery (I will not tire of saying it) I do not like this type of unique batteries! Especially speaking of a dron that you have 5 minutes of flight or average.

Related Links and Interest:
Syma X5UW: http://bit.ly/2h9iESL
Spares: http://bit.ly/2hPMLCw
Mejoras para imprimir en 3D: http://bit.ly/songoku_Tingiverse
Mis otros RC: http://bit.ly/SongoLand

Well here I leave, I hope to serve someone. Likewise if someone has any doubts about this dron and I can help you, you just need to ask me.
Thank you for coming here.

If you are interested in the thread subscribe, I will post the new things of this dron here.

regards

18
Hi friends ,  i have a new video from the first test flight of my aosenma cg035 with my action cam on suported by the 3d print plate i made for it.

http://www.youtube.com/watch?v=TcH8bVZ7Xkw
A gretting

19
Hi friends :) i have made a 3D print DIY support for install my action camera on the osenma CG035.

https://www.youtube.com/watch?v=ADo8zLN4zXc

a weekeng flight :)
https://www.youtube.com/watch?v=tnbQFxrBEHM

Testing my mini cam SQ8 on my Aosenma:
https://www.youtube.com/watch?v=x4F21EGQ3C0

Instruction manual of the Aosenma CG035
https://www.youtube.com/watch?v=VRIZgmTB4XM

A gretting

20
Electrics / BoldClash AIO CAM F-03 200MW Unboxing + Review [ Nice FPV Cam ]
« on: December 31, 2016, 19:05:29 PM »
Hello friends, I open this thread to talk about my new camera BoldClash F03 AIO for FPV .
This tiny 900TVL camera of 40 CH (including Race Band) is a good and quality choice.
The FPV is fashionable, and there are many offers on the market. This camera stands out in many of its virtues, low consumption and easy installation.



It can be used in different ways and comes with a complete set of cables for different configurations. Can be used both , in competition for its low weight,
power transmission and nice image, as well as in daily activities with FPV.
It is as simple as connecting the Cam to a battery (or to the receiver of your RC device) so that it automatically turns on and starts to emit. Just have to
select the channel in your FPV or goggles and ready to have fun.

Video of the unboxing:
https://www.youtube.com/watch?v=UvquJ5m8hGc


Package Content:

1 x Boldclash F-03 AIO FPV CAM VTX
2 x Clover Antennas
2 x Cables Set
1 x Boost Power
1x Instruction manual



The distance range distance is very great thanks to its 200MW, you have a clean and uncut transmission.
Easy to mount anywhere. It is so small that you can put it practically anywhere and it will not affect the least flight (in case of Installed in a flying device)



Spare parts included!
One of the highlights of this fantastic camera is the Omnidirectional replacement clover antenna that comes with it. Yes! Comes with an extra antenna!
This way you can easily replace a welder in case of an accident.



Camera power supply:
The camera is super versatile, can be used from 3 to 26V which makes it perfect for any type of utility. If it is to be used with a voltage
We infer to 4,8V it is necessary to use a Boost Module that is included in the box. Small and light. Easy to install.

Some outstanding features:
Small and straight, Perfect for FPV
The high-quality image sensor captures crisp, clear images of flights with amazing detail
The wide-angle lens covers a wider view
5 bands, 40 channels with Race Band
NTSC / PAL switch
Support selection of 25mW / 200mW with digital tube spot display
*Vertical mirror image and horizontal mirror image switch
Support TX Enable / Disable RF Output Power
Supports OSD with external video input / output



Video transmission.
This small BoldClash f03 offers possibility to select PAL or NTSC, another point in its favor, not to mention the possibility of inverting the image or
Make a mirror (Just amazing for that price) .. supports OSD input video and external audio, ..
As I mentioned, it has 40 channels spread out in bands. Which are configured in the back of the camera, having a clear display,
Being very simple and eaten to set up.



Buying links and other interesting links:
For a discount of 6% use the code: " BD "
Boldclash AIO Cam F-03: http://bit.ly/2iy2STa
Improvements to 3D printing: http://bit.ly/songoku_Tingiverse
My other RC: http://bit.ly/SongoLand

Technical Specifications:
Budget
Boldclash Brand
Model F-03
Frequency band 5645-5945MHz
Channel 40 Client
FM modulation type
SEL channel. Touch Switch / PWM
Channel 1 + 2S ABCDE (channel group and channel alternate display, touch button channel + 1 and group A / B / C / D / E + 1 switch of required frequencies Touch buttons up to 2S)
Transmission Power 131dBm and 231dBm
Frequency Control PLL
All Harmonic Max -50dBm
Frequency Stability 100KHz (typical)
Frequency Accuracy 200KHz (typical)
Error in channel 1dB
Antenna port 50
NTSC / PAL input format
PAL Sensor: 960 x 576 @ 1/3
Pixel cash 976 * 592
MAX. Frame Rate NTSC: 60 fied / sec PAL: 50 fied / sec
Lens Angel H110 / V68
Baseband interface 5pin Header + P2.54 * 3 + P2.54 * 3
Power Consumption Max 100mA @ 12V DCIN
Supply voltage 3V-26V
Operating temperature -10 ° C - + 60 ° C
Ambient temperature 25 ° C
Dimensions (0.91 x 0.79 x 0.39) "/ (2.3 x 2 x 1) cm (L x I x H)
Weight 0.34oz / 9.7g

A greeting and Happy New Year!

21
Hello friends, I want to present to the last dron who has joined the songoland family.
Today I will talk about JJRC ELFIE or H37 , a dron that is in the line of portable drones, as we know the pocket drones are popular this days.
And I am sure we will see a rapid evolution in this model and others similar.
First of all, I want to make it clear that this dron is Toy type. If you buy it thinking that you will have a Zerotech Dobby of 300 € for just over 30 €,
It is not like this.
I have read reviews on the internet of people trying to compare them or saying that this ELFIE is a copy of Zerotech. Nothing could be further from the truth..
Maybe its shape is similar, since both are Pocket drones, but once seen the physical resemblance, the differences beginning with the price are clear.



JJRC Elfie is a very innovative dron, I would say of the best pocket there is currently. It has a built-in camera for taking pictures and videos and
for my surprise it is comfortable to fly. As you know, comes with no command, is used from a smartphone with an app, from there you have all the options
and modes available.  More portable drone is impossible. Thanks to its design of folding legs is easy to carry, has the size of a phone and weighs little.

Unboxing video
https://www.youtube.com/watch?v=HKPa9GiHq_k

Package Contents:
1 x RC Drone,
1 USB charger
4x spare propeller
1x Carrying bag
1x instructions



360º Flips
This little one is able to do tricks and stay so wide! At first you may seem a bit confused but you are accustomed to piloting drones with the phone.
It is never the same as with the command, but the truth that in JJRC have done a great job with the software developed for the control of stunts in this pocket dron.

Back home.
This dron, which does NOT have GPS, uses the same technology as its big btothers to return home automatically, with the press of a key, the ELFIE Will
return the phone with which it has been paired. For this function to work correctly, the same control and dron position must be maintained in which it was at the
time of being paired. Remember that it has no GPS and is the only way the dron has to be able to go back home.



FPV and camera
Thanks to the App for the phone, we can have a FPV vision via wifi, from the camera of ELFIE 720P, So we can visualize on screen what the dron sees before taking
a picture and recording video.



Controller:
This H37, comes without controller, is controlled directly with the mobile phone, just download the application and once installed, connect to the network wifi which
generates the dron. This way you can control all the functions you have and your different flight modes. The system has been greatly improved, making the drive by this jjrc ,,
 thanks to its altitude control is easier than ever. With a little practice you can get some pretty funny flights.



Automatic take-off.
Another of the functions to emphasize in that small, is the automatic detachment. One touch of the button and the ELFIE will begin to fly in front of you.

Headless Mode
Of course, this pocket drone offers the possibility of flying in "headless mode" A mode that works quite well and they already have more than good
Tested jjrc manufacturers.



The battery:
It assembles a battery of 3.7V 500mAh of elongated form, that perfectly withstands a few short flights before having to be recharged. Hurry up
To the maximum I got about 10 minutes of flight, in good conditions and flying quiet.

My Conclusion:
Well I think we are facing a dron, very interesting, pocket, laptop and lime, it shocks me a bit that I sell it as a dron to do selfies, it is true
That has camera, but neither is that it is of a very good quality. If maybe to take some aerial photo, or record some funny video, but let's be realistic, the strength
of this dron is not his camera.
I think the best thing that this dron offers us, is its innovative design, with retractable legs, easy to carry and resistant. Without a controller to load, It's great to be
able to fly anywhere, without the need to worry about where you're taking it. I bet on these models, it is clear that there is still much way to go, but simulate back,
we will see that in the last half year there have been many advances in small drones, and some work really well.
I think that very soon you get a big boom of all these pocket folding models, the APPs work better and manufacturers do not stop trying new things.
So I think this dron is perfect for anyone who wants to have a first contact with this class of drones. This is a funny candidate for me.

Breaking news:
JJRC has pulled out a pink model. Which is available shortly.
Link to pink: http://bit.ly/2ii8fGB


Buying links and other interesting links:
JJRC ELFIE H37 http://bit.ly/2hmlQvh
Spares jjrc: http://bit.ly/2gXpXwB
Improvements to 3D printing: http://bit.ly/songoku_Tingiverse
My other RC: http://bit.ly/SongoLand

Technical specifications:
Brand Name: JJRC
Type: Quadcopter
Model: H37 ELFIE
Features: Controlled by phone, WiFi FPV
Engine type: Engine brushed
Functions: 3D Capability, Camera, Forward / Backward, FPV, Gravity Direction Control, Headless Mode, One-Touch Return, One-
Side-scrolling, Left / right turn, Up / down, WiFi connection, With light
Built-in Gyro: 6-axis Gyro
Night Flight: Yes
Material: Electronic components, plastic
Level: Beginner level
Connectivity
Remote Control: WiFi Remote Control
Channel: 4 Channels
Detailed control distance: About 100m
Power Transmitter: No transmitter included
Battery
Battery: 3.7V 500mAh (built-in)
Flight time: 8-15mins
Charging time (h): approximately 45 minutes
Camera
Video Resolution: 720p
Dimension and weight
Product Weight: 0.073 kg
Package weight: 0.262 kg
Product Size (W x H x D): 6.50 x 13.50 x 2.50 cm / 2.56 x 5.31 x 0.98 inches
Package Size (W x H x D): 15.50 x 8.80 x 6.00 cm / 6.1 x 3.46 x 2.36 inches

22
Electrics / JJRC H36 Mini Dron + Unboxing + Review
« on: December 29, 2016, 14:56:58 PM »
Hello friends, today I open this thread to talk a little about the little JJRC 36, a super economical fun drone .

These mini drones are very popular this days and there are super-similar models (or clones) from other brands, such as the Eachine E010, Blade Inductrix
or furibee F36. All of them with slight differences, which make of each his special touch.



JJRC H36 2.4GHz 4CH 6 Axis Gyro RC Quadcopter
The JJRC H36 is a mini drone that does not leave the driver indifferent. It has several modes of speed, and very cool functions, like the return home, that
works perfectly btw. It is so small that it fits perfectly in the palm of the hand, and its main attraction is its propeller protection system, which makes it very
resistant and stable in flight.

Unboxing Video:
https://www.youtube.com/watch?v=VaiwoCDEX1Y

Package Contents:
1 x RC Quadcopter
1 x Transmitter
1 x USB Cable
4 x Spare Blade
1 x English User Manual



360º Flips
Does a good job on the flips, I noticed that even having the batteries fully charged, after performing a trick it costs a little more to recover than the
furibee F36 (which does the trick and barely moves from its position). But it works well in all directions. very funny.

Automatic return home
On this dron I was surprised how well it goes! When the dron is activated it goes directly to the transmitter, the height must be controlled manually, and
if the steering stick is touched the order is canceled and the dron stays where it is. Useful and fun.



Headless mode.
Another function that goes well on this dron, even making him hang like a madman works the wonder. It is noticeable that the trick to this technology
already exists and undoubtedly in this dron appreciate this advances very well.



The controller:
The control of this dron is quite small. As you can see in the photograph, maybe if you have big hands is going to be a little more uncomfortable to fly.
It seems that now
they like doing these mini-controls.



Battery:
The battery, I was surprised by its small size and duration of flight. Accustomed to heavier 400mAh batteries, I repeat, I have been impressed, it gives us a
flight of about 5 or 6 minutes. And takes about 25-30 minutes to load. So with a few extra batteries (worth € 1.5) you can ensure flying without stopping as long
as you want.

Valuation,
Well I give it a 10 out of 10, it's a fun dron and the only cont that I can find (to get one) is the size of the controller.
That if you have big hands like me, maybe it makes a little more uncomfortable to drive. Otherwise, it is an indoor dron (and outside if good day) super fun and
perfect to learn to fly. Inexpensive and resistant, in addition to being very popular, so there are cheap and all kinds of easy to find spare parts. In addition to much
information and modifications on the internet. 100% recomended.

+Technical data and where to buy links:
JJRC H36 http://bit.ly/2gWNzGC
Extra spare battery : http://bit.ly/2i0B4WG
Similar Models: Furibee F36 http://bit.ly/2haxbRv
Improvements to 3D printing: http://bit.ly/songoku_Tingiverse
My other RC: http://bit.ly/SongoLand

JJRC H36 Features and Specifications:
Specification
General
Brand: JJRC
Type: Quadcopter
Features: Radio Control
Functions: 3D rollover,Headless Mode,One Key Automatic Return,Sideward flight,Speed up,Turn left/right,Up/down
Level: Beginner Level
Connectivity
Remote Control: Radio Control
Channel: 4-Channels
Detailed Control Distance: 30m
Transmitter Power: 2 x 1.5V AA battery(not included)
Model Power: 1 x Lithium battery(included)
Battery
Battery: 3.7V 150mAh
Flying Time: 5~6mins
Charging Time (h): 30 - 50 minutes
Dimension and Weight
Product weight: 0.022 kg
Package weight: 0.230 kg
Product size (L x W x H): 9.50 x 9.50 x 5.00 cm / 3.74 x 3.74 x 1.97 inches
Package size (L x W x H): 14.00 x 8.60 x 11.00 cm / 5.51 x 3.39 x 4.33 inches

23
Electrics / FuriBee F36 Mini Dron / Tiny Whoop + Unboxing + Review
« on: December 29, 2016, 02:10:55 AM »
Hello friends, today I open this thread to talk a little about the small Furibee F36, a dron super fun and economical dron.

These mindrons are very popular lately and there are super-similar models, or clones directly, from other brands, such as the Eachine E010, Blade Inductrix
 or jjrc h36. All of them with slight differences, which make of each his special touch.



Furibee F36 2.4GHz 4CH 6 Axis Gyro RC Quadcopter
Furibee F36 is a mini drone that does not leave the driver indifferent. It has several modes of speed, and very cool functions, like the return home, that works
 perfectly. It is so small that it fits perfectly in the palm of the hand, and its main attraction is its propeller protection system, which makes it very resistant and
 stable in flight.

Furibee F36 unboxing video
https://www.youtube.com/watch?v=0xaBU0IHn8I

Package Contents:
1 x RC Quadcopter
1 x Transmitter
4 x Propeller
1 x USB Cable
1 x Screw Driver
1 x English User Manual



360º Flips
Does a good job on the flips, I noticed that even having the batteries fully charged, after performing a trick does not cost anything to recover, surpassing seems
 to be some of its competitors with more power. (At least that has seemed to me). It works well in all directions. very funny.

Automatic return home
On this dron I was surprised how well it goes! When the dron is activated it goes directly to the transmitter, the height must be controlled manually, and if the steering
stick is touched the order is canceled and the dron stays where it is. Useful and fun.



Headless mode.
Another function that goes well on this dron, even making him hang like a madman works the wonder. It is noticeable that the trick to this technology already
exists and undoubtedly in this dron appreciate this advances very well.



The controller:
The control of this dron is quite small. As you can see in the photograph, maybe if you have big hands is going to be a little more uncomfortable to fly. It seems that now
they like doing these mini-controls.



The battery
I was surprised by its small size and duration of flight. Accustomed to heavier 400mAh batteries, I repeat, I have been impressed, it gives us a flight of about 5 or 6 minutes.
And takes about 25-30 minutes to load. So with a few extra batteries (worth € 1.5) you can ensure flying without stopping as long as you want.

Conclusion
Well I give it a 10 out of 10, it's a fun dron and the only pro that I can find (to get one) is the size of the command.
That if you have big hands like me, maybe it makes a little more uncomfortable to drive. Otherwise, it is an indoor dron (and outside if good day) super fun and perfect to learn to fly.
Inexpensive and resistant, in addition to being very popular, so there are cheap and all kinds of easy to find spare parts. In addition to much information and modifications
on the internet. 100% recommended

Related Links and Interest:
Furibee F36 👉 http://bit.ly/2haxbRv
Extra spare battery: <img src=" class="SM_EmojiOne" /> http://bit.ly/2hTYIW3
Similar Models: JJRC H36 <img src=" class="SM_EmojiOne" /> http://bit.ly/2gWNzGC
Improvements to 3D printing: http://bit.ly/songoku_Tingiverse
My other RC: http://bit.ly/SongoLand

Technical specifications:
Custom
Wheelbase: 70mm
general
Brand: FuriBee
Type: Quadcopter
Model: F36
Features: Radio Control
Engine Type: Brushed Engine
Functions: 3D rollover, Headless Mode, One Key Automatic Return, Sideward flight, Speed ​​up, Turn left / right, Up / down, With light
Level: Beginner Level
Connectivity
Remote Control: 2.4GHz Wireless Remote Control
Channel: 4-Channels
Detailed Control Distance: 30m
Transmitter Power: 3 x AAA battery (not included)
Model Power: 1 x Lithium battery (included)
Battery
Battery: 3.7V 150mAh
Flying Time: 5 ~ 6mins
Charging Time (h): 30 - 50 minutes
Dimension and Weight
Product weight: 0.022 kg
Package weight: 0.230 kg
Product size (W x H x H): 9.50 x 9.50 x 5.00 cm / 3.74 x 3.74 x 1.97 inches
Package size (W x H x H): 14.00 x 9.00 x 11.00 cm / 5.51 x 3.54 x 4.33 inches

24
Hello friends, I open this thread for presented to the last dron who has joined the songoland family

This time, we moved to the dark side if Star Wars. At the controls of this Tie Fighter, a piece that lovers of this saga will appreciate very well, with a level
of detail very close to that of the film. An extremely stable flight with a presence worthy of flying.



It is focused on any type of pilot, it is a dron with 3 flight modes, given its shape and weight, also due to its short helices, responds well, although for my
 taste, it lacks a bit of power to recover later Of an abrupt action.

The model is made of a resistant plastic, a little flexible, which makes it practically indestructible. Their helices are flexible. It is a toy, and in the worst case
if there is a loss of control, I do not think it can generate any damage. So it is also good to fly inland. (Where you feel really stable.

Package Contents:
1 x RC Toy, 1 x Transmitter, 2 x CW Replacement Propeller, 2 x CCW Replacement Propeller, 1 x Charging Cable, 1 x 3.7V 350mAh LiPo Battery

Video of the unboxing:
https://www.youtube.com/watch?v=r0dMPnSpq3A

Main features:
- 360 degree acrobatics function
It's really awesome to see make this a Fighter! Little more I can say, I love to see him fly!
It works perfectly with that mane, without any delay. Maybe it costs him to recover a little after the acrobatics if the battery is already quite unloaded.
The way to make the flips is very intuitive, tapping the upper right button and moving the direction stick on the desired side, the Tie Fighter will do a 360 in that direction.



- The Controller.
Has a nice black and red handle, I really like the design, I think it is noticed that they have taken the trouble to design a way to corde with the product.
This is appreciated. Since many drones of similar price, come with generic controls that my point of view degrades the value of the set.
The distance range is not bad. I have been flying dunks 50 meters or more without problem (too far already for my given the size of this small)
So in control distance very well.
Also it is very easy to control all its functions, to tripera the ship just have to hold down the upper left button, while with the jostic of direction we refine it quickly.
Once ready, just release the button and fly.



- Headless mode.
The headless mode of this drone, works great! (Always when the initial position of the station is respected when the pairing with the dron was made).
 In this mode, even the most novice could pilot this small. Easy and intuitive, thanks to this accomplished headlees mode.



-The battery
Assembles a battery of 3.7V very common, which is perfect to be able to use others that we have of other drones and similar characteristics.


Pros
- very nice model (even stopped decorates a lot xD)
- Flight time of 7 minutes with a small battery
- Batteries very common and cheap
- control knob very eaten, easy to fly
- Recommended to start

Cons
- Chinese instructions manual

Related Links and Interest:
Star wars Tie FIghter: 👉 http://bit.ly/2hwQYrZ
Star wars Spaceship : 👉 http://bit.ly/2ihwCXC
Star wars cool stuff:👉 http://bit.ly/2i6Z5fD
Improvements to 3D printing: http://bit.ly/songoku_Tingiverse
My other RC: http://bit.ly/SongoLand


Technical specifications:
Type: Other RC Toys
Feature: Radio Control
Age: Older than 8 years
Material: Electronic components, metal, plastic
Remote control: 2.4 GHz wireless remote control
Channel: 4 Channels
Mode: Mode 2 (left hand accelerator)
Transmitter Power: 3 x 1.5V AAA battery (not included)
Model Power: 3.7V 350mah Lipo (included)
Charging time: 40 ~ 50mins
Playing time: 5 ~ 8mins
Dimension and weight
Product Weight: 0.700 kg
Product Size (W x H x D): 18.00 x 18.00 x 15.00 cm / 7.09 x 7.09 x 5.91 inches

25
Hi Friends ,  i have made one 3d Printable (3D Print) model for protect the camera and antena of my AIO JF-01 FPV Camera.

You can download the file for free and print your one here :

https://www.youtube.com/watch?v=8cNagKXFmFk

A gretting

26
Hello friends, today I open this small thread to talk a little about my new FPV camera AIO JF-01.
This small, tiny camera is (I'm almost sure) just like the Eachine ef.01, with its fans and its buriers,
there are people who use it for those Tiny Whoops that are so cool lately, but it can be used for any
kind of Apparatus or application.

A really fun toy with lots of possibilities. I have thought to incorporate it to my drones and make fpv
with glasses for the first time with her ,,, I hope that everything goes well!

I leave a video of the unboxing so you can see everything that includes the box.

https://www.youtube.com/watch?v=cDJjzpZpxf4&t=237s

Package Contents:
1 x Camera
1 x Cable
1 x English Manual

Main features of this FPV camera.
It includes everything necessary to make a stable FPV, only needs to be powered by the connector that
has and will be working.
Its CMOS sensor produces brilliant images that are as good as what a CCD sensor produces. With considerable
savings in price.
It has an ultra wide angle lens that gives you a panoramic view with FOV of 148 degrees and DFOV of 170 degrees.
The image parameters and lens angle are designed for FPV.
Not only for the smallest drones, it can also be used on larger drones, thanks to the powerful low-power antenna,
only 6.8g and 25mW respectively.
With a total of 40 Channels, distributed in 5 bands including Raceband for anti-interference.

Technical specifications


Protective metal case (detachable)
It comes encapsulated in an easy box to remove (if necessary to lose some extra grams), but always that it can be
mounted better, since it helps to dissipate the heat generated by the video tranny.



The antenna:
The antenna, is mushroom type, giving good rando in any position in which the dron (or apparatus that has it)



The battery:
The manufacturer recommends guive it a DC current from 3.6 to 5.5V, if you wanted to connect to a voltage
font directly like the mainboard you can , but if you have more vats , would have to install some regulator between the camera and the battery.
I use it with my jjrc H20H battery (the one on the image, and works prefect)



Personal opinion:
I think this camera is very interesting given its versatility, although you can not inject video, to show parameters such
as those of GPS, it is true that it is powerful and small, perhaps the type of antenna is the most vulnerable part of this
Model, being so exposed and so rigid, in case of accident the chances of being damaged are quite high.

I have read that there are people that seemplaza the antenna for a latigo, but I think that limits the range, so once again,
depending on what you want to use the camera, it would be more correct one conifguration or another. One good thing is
that it is easy to modify it, a simple touch of tiler and the antenna will be free.

Pros
Its size
Ease of use
Ease of installation
long-range
40 channels

Cons

high temperature
Antenna very exposed to shocks

Purchase and related links:
AIO FPV camera link: http://bit.ly/2hzM94X
Battery for AIO camera link: http://bit.ly/2gVheMc
Furibee VR 01 link: http://bit.ly/2hsNozP
Battery for Furibee VR01: http://bit.ly/2gvOeJT

Ideas and improvements in 3D: http://bit.ly/SongoLand

Video configuration with some glasses FuriBee VR01
https://www.youtube.com/watch?v=tY5y1Xg39u4

27
Hello friends, today I open this thread to share with you my first experience with FPV Googles.
I have beem long flying drones but I have never tried FPV with glasses, especially for its high price.
Finally, it seems that they are getting cheaper , which makes it possible to enjoy FPV
For quite a little money. (My kit of glasses and camera, cost less than 50 € taking advantage of the offers and coupons
 Of this store. * Not counting the batteries)



Well, here I present the last nice thing that has joined the family. They are the Glasses FuriBee model VR 01,
I think they are the most cheapest (or if not one of the most) we have right now in the market.
With two antennas to have in any situation the maximum possible coverage. With a 4.3 "screen and
 quality finish, furibee has managed to bring a functional FPV glasses for all the public.
After a thorough inspection, I can say that things like connectors or buttons look good.Also the construction materials.

I leave here the video of Unboxing so that you can see better everything that the box brings and how it is presented.

https://www.youtube.com/watch?v=a6g87OkCApQ

Box Cottening:
1 x Pair of VR01 FPV Goggles
1 x Mushroom Antenna
1 x Planar Antenna
1 x AV Cable
1 x Power Cable
1 x English Manual


These FuriBee VR01 FPV Goggles have 40 easy-to-configure channels, including RaceBand, and a
Time of use that depends on the batteries that we decide to put in. The manufacturer recommends using 2S and 3S batteries.

The design of the glasses is very fun, with your DUAL ANTENNA, when you put them on , you will become a
Authentic "furBee" bumble bee aahah, but you have to give thanks to his extravagant look, since it is precisely
those dual antennas which makes these glasses stand out over the rest. With a lightweight design (less than 300g)
It is comfortable to wear them for long periods of time.
The FuriBee VR01 FPV Goggles has a sensitivity of -90dBi, a 14dBi planar antenna and a 4dBi Mushroom type.



The screen:
As I said before, they mount a 4.3-inch screen in 16:9 format with a resolution
Of 480x272px and giving the option of being used in NTSC and PAL. The frequency used is 5.8GHz, sufficient
to not only enjoy the FPV glasses with any of our RC, but also (* thanks to its AV input) we can connect other video sources, such
as movie players, consoles or the like.  Soo cool!



Ls Battery:
This FuriBee VR01 FPV Goggles uses 2S 520mAh or 3S 2200mAh batteries. * The battery is not included in the package.
With the batteries 2S 520mAh can reach a time of use of about 3 hours and with a battery 3S 2200mAh
More than 15h .. More than enough time for any type of flight or activity.



my Opinion
Well, since they are my first FPV glasses, it is not that I can buy them physically with others, but i have see many videos and search the
internet, I found a very good option to have a first contact with this technology (at a reasonable price).
Also very easy to configure everything, never before had done and was really simple.
So very happy with my Furibee. I hope to have a good time with them.

Here I leave a video of how I have paired these glasses to the AIO CAM for the first time.

https://www.youtube.com/watch?v=tY5y1Xg39u4

Links with technical information, purchase and Related:
Furibee VR 01 link: http://bit.ly/2hsNozP
Battery for Furibee VR01: http://bit.ly/2gvOeJT

AIO FPV camera link: http://bit.ly/2hzM94X
Battery for AIO camera link: http://bit.ly/2gVheMc

Ideas and improvements in 3D: http://bit.ly/SongoLand

If someone has some curiosity about these gagas and I can help solve it, leave a message and if it will make it enchanted.
regards

28
Electrics / AOSENMA CG035 GPS+Headless+Followme+Interest Point+Ret home+
« on: December 04, 2016, 06:20:01 AM »
Hello friends, today I want to tell you a little of the last quadcopter that has joined the family.
It is an AOSENMA CG035, a quad who incorporates a GPS that is possible to connect and disconnect at your whim .. With functions like his biggest competitors ..

Follow me mode, automatic return, point of interest (of 360º looking to the center), failsafe and headless mode and of course altitude hold.

This dron of the manufacturer AOSENMA Toys, but is not exactly a toy, it have brushless motors quite powerfull, besides already having a considerable weight.
It is recommended for beginners, but not for leaving to a child unattended.



The CG035 is available in two versions, the Standard version (the one I have) and the 1080P version (which is exactly the same but includes camera and monitor)
, after looking at the two models, at last I was not convinced by the camera of the 1080p model, obviously I have not tried but what little I have been able to find out
* about the gimball was not enough to convince me.

On the other hand, the dron seems very interesting for many things, the first is cheap (compared to other drones that promise the same thing), another
Feature that I like, is its size, not as big as a phantom, is rather the size of my Robocat, making it easy and comfort if you have to carry it.
I also like the option of failsafe, just about a month ago, I lost my MJX along with Goprohero, something failed and the dron went flying with the camera of 200€ on top for to never return back.. it is assumed that with this, should not happen, if everything goes wrong, or the connection is lost
*The transmitter, the dron will automatically return to the point where it takes off.

Well, as a video is worth more than 10 thousand words, here I leave the boxing I have recorded.

Video Unboxing AOSENMA TOYS CG035
https://www.youtube.com/watch?V=SYwpsvK7BiE

What you find in the box:
1x Instruction manual (English and Chinese)
1x Drone AOSENMA CG035
1x Broadcaster
1x Batteria 7,4v 2600mah
1x Charger
1x Spare Screw Set + Screwdriver

The Dron:
Esthetically I think it's very cool, but it reminds me look of the MJX that I lost. It has a nice line and is painted in a bright white color that
Gives a different look and quality finish. The frame of this dron is made of a plastic that is pleasant to the touch, just like the transmitter. I think they make a very good couple.



Let's talk a little about its functions:

Automatic take-off and landing.
As a good beginner, I will start at this point, always a little scared the first few times, especially land, well with this quadcopter not have this problems more.
 since with 3 pulsations you can make it land /take off alone. (It is recommended to have it one and a half or two feet off the ground before activating this option)

Follow me: Well, this function seems to me amazing! The dron will follow you wherever you go. To rectify the position of the nose, we must leave the following way
And reorient it if necessary manually. Once in the desired position is activated again and ready.

Headless mode: This function for (which I am not very good pilot and besides I do not see very well) is the best one that has! ,, This mode works perfectly and I recommend it
For all those who do not know how to pilot and need to learn.

Failsafe mode: Another super funcion that promises this little one, is .. in case everything goes wrong, it alone would try that to enter in that way when losing the signal and return
Safe and place were it take of.

Height Control: Another of these great functions that make life easier to allo of those that we are starting in this of the quadcopters, that the dron holds
Automatically height altitude is another dimension for pilos. ilove it.

Point of interest: This is very interesting if you are recording video, this model although it is the one that comes without camera, like its brother with camera, it brings all the
Connections and supports to connect a gimall of 2 axes to the dron. Or make some invention (like what I have in mind with another camera) to be able to couple other things.

Automatic return: As this function, although I have tried it has returned (not always near where I take off) obviously has its advantage, with a
Just click the dron will come back alone. I say that I have not always returned to the exact site, but at least it has returned. That if it could also be due to a
Poor coverage of GPS satellites in that place ,, other times it worked perfect.



The command: As I said before, this pimp! Made in a pleasant touch and already with a considerable size. Functions with 4 AA batteries, (few for my taste)
The manufacturer promote 300 meters, I still have not taken it that far and I would not risk it. I think this comfortable in a range of 170/150 meters. The use of
Combinations in the positions of the command, at first may seem a bit confusing but ends up being comfortable soon.



The battery:
This AOSENMA incorporates a battery of two sets of 7.4v 2600mah, The flight time may vary depending on the mode of flight and the accessories that we have
Hooked to the dron, but among all, an average of 12 minutes of flight. Not bad because of the weight of the dron and I really did not expect it to fly more than 10 minutes,
(But the manufacturer in this case says that the flight time is 15 to 20 minutes)
The good point is that the batteries of this quadcopter, are common ones, easy to get, or simply you can buy spare parts of the original for about 15 € each battery.



Personal conclusion.
This dron of the discord has many followers, but also many enemies .. Of course, it is easy to criticize the precision of your flight modes if you have a phantom.
(Which would have cost € 700), I will not go into comparisons, much less with a phantom, but if I say that this dron "low price" has nothing to envy to many
, A lot of that avalanche of dornes that there is lately in the market.
This is clear that it is not a racing dron, (although it runs quite if you remove the GPS) fine and easy to control .. so you do not have to worry about anything just to enjoy.
But look, I repeat! It is cheap but this is not a toy! Those engines if they hook you they will make you go to the hospital.
Thanks to the brackets you carry in the chassis, I think it would be a good dron to mount a fvp on it, since there is a lot of space, and strength has plenty.
To which I take glasses, at least I have to do the test.



I have heard people speak badly about this dron, but I think what is happening is that there is some confusion with the models, THis one is an updated model, but it still has the same name
Which it had before. There is a version od this drone, that does not have GPS, and that version is true, leaves much to be desired. But in this model, at least tfor me, at the moment works me wonderfully.

Here I leave a short list of what for me are its pros and cons

Pros
One of the most economical drones on the market with GPS
Follow me
Retourn home
Safe Mode
Point of interest
Height control
Possibility to deactivate GPS

Cons
Gimball (in the version with camera)
Camara (In the version with camera)

Related Links and Interest:
More technical data and purchase link: http://bit.ly/2gUC27o
Battery and spare parts spare parts: http://bit.ly/2g6HJ3m

Improvements to 3D printing: About _sOnGoKu_ - Thingiverse
My other RC: SongoLand
- YouTube


Here is the video of how to correctly configure the GPS of your CG035:
http://www.youtube.com/watch?v=qTvgDeZZdB4

Here I leave a video of my first flight:
http://www.youtube.com/watch?v=CnK_QQUo29o

Well here I leave, I hope to serve someone. Likewise if someone has any doubts about this dron and I can help you, you just need to ask me.
Thank you for coming here.

If you are interested in the thread subscribe, I will post the new things of this dron here.

regards

29
Helow friends, today im glad to present you the las dron arrive tome, The Hubsan fpv x4 H107D+ a mini
or nano drone RTF with HD camera.
I was eager to receive this drone, whole husban family seem to me one of the best secondary brands, with designs
 very careful and always updating models with more improvements. First of all I would love to thank the whole team
 Banggood guys, really they are great! without all their support, these video would not be possible. Thank you at all!.

https://www.youtube.com/watch?v=K6CG3RusJW8

This small drone, in particular, has a 4.3" screen for FPV (integrated in the Transmitter), which this great thing
, remember that this drone, it is more for internal flights. Or at less where I've enjoyed it  more, do well outdoors as
long as not windy. Wind, like most minidrones is dificult to control. You can record and take photos easily, has a beautiful
design, reminiscent of its bigger brothers.



Drone very easy to carry, thanks to its altitude hold (which incidentally works great) is much easier to control
the movements of the drone, also giving a perfect tool to record some good videos.

The flight time is around 7 minutes, always depending on the type of driving that applies. 360 easily flip ago. The bateri
 to be 3.7v load pretty fast, about 60 minutes ready to fly again. (I recommend you buy some more extra batteries!) Is
always welcome to have more flying time.



As you can see in the videos and photos, it have a spectacular line. With LED lights for easy identification of its position,
although you can use mode "headless" or headless to not have to worry about this.

The drone have a super type impact-resistant plastic (even a little flexible) I love this detail ,, honestly, it crash a cuple of
times and has not broken anything or any damaged propeller.



You have the power button embedded in the hull, a very nice touch by the designers, the transmitter set, complete with a
own menu for internal adjustments.
Several features normal and expert modes of flight, tuning and other thinkgs. (see the video fomr the controller for more info)



It has a large screen, where you see live the wifi camera drone (FVP). You can see also the recorded videos you have on the
dron SD memory.
But hey, leaving the aesthetic details aside, I will say that it is a Transmitter with many buttons and options, most of which
usually brings a mini drone of this size, then you can adjust values ​, such as the percentage of power , desired each flight mode, etc ..
Very complete and recomendable to tune it up!

The controls are centered type (as it has Altitude hold control) Easy to land and take off, which is great. The distance of the
transmitter is
a real 50/60 meters, at more distance i start to have lost video signal and the drone not repsonde quickly.



If you are looking for a fast and furious drone, perhaps this is not the most suitable, speed is not one of its strengths, but it have
this fantastic HD camera, I think it's more interesting to make good recordings, with a little more stability in the video.
To go fast there are other drones in the market.

The HD camera if is in the day time, ir record pretty well for me.. see some videos about.

The contents of the box unboxing:
https://www.youtube.com/watch?v=oI3qTy8NnJ4

I also ordered two more batteries to have a flight time of about 20 minutes total.

To see more technical features here:
+ Technical data and where to buy link:
http://bit.ly/2evIOjY

a greeting

30
Hello friends! I want to show the last drone that reached me at my hands, it's just great! how many times I have dreamed to have something, and it has finally arrived :)

1031 Halloween Skull Flying Ghost Quadcopter ! RTF

Unboxing:
http://www.youtube.com/watch?v=6zgyvTmBqLE

Well the new member has joined Songoland almost needs no introduction, it is the perfect place to spend some jokes drone!

Have you ever wondered what if a ghost, a scull and a drone mixes? The result is this interesting toy ..



The drone has a X chassis with brush motor, with a lot of leds and 7.4V battery for good measure power in maintaining the flight and fight the wind.

Have the most original ghost guaranteed. With a fantastic effect from the first moment that takes off to fly.
Children will love it! this drone, despite its size, is completely safe, do not be afraid to break something or hurt, the props are flexible plastic and the overall design seems almost indestructible.



It has a transmitter that works with 6 AA batteries, which guarantees a good distance control (so you can hide away so that the shock is larger)



It comes with everything you need to play from the start, also it brings several parts, if there is a problem.
Halowen I think this will be very crazy! what do you say??

Trick or Treating? muuaahahahah

you can see or buy your one here:
http://bit.ly/2epIh1e

Name: 1031 RC Quadcopter
Color: White
Material: Electronic components, ABS/PS
Frequency: 2.4G
Flight Duration: About 6-8 Minutes
Remote Control Distance: About 80-100 meters
Charging Time: 150 mins, faster with a hobby grade charger.
Battery: 7.4V 850mAh (included)

The propellers must be put on the drone and screwed in securely, but after that is completed the drone is ready to fly. There is no further assembly required.



Pros:
I can not stop watching pros in this Drone ..
Perfect to scare the neighbor
Light
Safe and fun

Cons:
which has no camera to record the faces that will appose them when they see come flying, ejeje

Happy halowen friends!

Related Links:
some more technical data: http://bit.ly/2epIh1eMore 3D print improvements?I recommend that you go through this thread: http://bit.ly/songoku_Tingiverse

More videos about RC ?: http://bit.ly/SongoLand

Well here I leave it, I hope serve someone.

Thanks for getting here! soon will put new things

Pages: 1 [2] 3