GliderIreland - Ireland RC Forum - Flying Model forum in Ireland

Misceleanous => Wanted => Topic started by: Happy Days on July 26, 2012, 20:12:37 PM

Title: Entry Level 2.4 TX
Post by: Happy Days on July 26, 2012, 20:12:37 PM

Wanted for a new friend of mine, :) …….entry level 2.4gHz Tx.

Min 4chnl. Must have expo and preferably dual rates.

His wife says he can only spend 100 quid on it. (She’s a hard woman, to be sure! :roll: )

Keith

Title: Entry Level 2.4 TX
Post by: Fred on August 01, 2012, 09:15:08 AM

Hey Keith,

I have what you are looking for!  :D
I have a brand new HXT9x transmitter, with all the options (with Lipo battery) and a few receivers.
Only tested on the Easyglider for range etc, and never used since!

Let me know if interrested, I'll take some photos  :D

Title: Entry Level 2.4 TX
Post by: Happy Days on August 01, 2012, 09:54:30 AM

ER,...I don't know the HXT9x transmitter :?:  What make is it Fred?

K.

Title: Entry Level 2.4 TX
Post by: Fred on August 01, 2012, 09:59:08 AM

That's the one : http://www.hobbyking.com/hobbyking/store/__8991__Turnigy_9X_9Ch_Transmitter_w_Module_8ch_Receiver_Mode_1_v2_Firmware_.html   :D

Title: Entry Level 2.4 TX
Post by: Happy Days on August 01, 2012, 10:23:42 AM

Is it mode 2 Fred?

Seems very good value for money. BTW does it have expo as well?


Before you go to the trouble of taking pictures I’ll pass on your info.

The friend I’m taking about is named Keith! I told him the model flying scene in Ireland isn’t big enough for two pilots called Keith :evil: , but he pointed out that, at the moment, he isn’t a pilot!
So far he’s only shown interest in powered flight with the MCFC, but I’ll ‘work on him’ and maybe, just maybe, he’ll come over to the civilized side of model flight. :wink:

K.

Title: Entry Level 2.4 TX
Post by: Happy Days on September 04, 2012, 22:22:14 PM

How much do you want for it Fred?

Title: Entry Level 2.4 TX
Post by: Keith on September 18, 2012, 14:43:23 PM

How much are you looking for it Fred ??

Title: Entry Level 2.4 TX
Post by: Fred on October 01, 2012, 13:09:55 PM

Hi Keith,

Here is the manual (Imax), in PDF (24Mb)

http://www.filadelfosrc.com/Manuals/TX-9X-M2-Manual.pdf

The Official manual :

http://www.hobbyking.com/hobbyking/store/uploads/981111029X319857X47.pdf

Everything about the upgrade to the ER9x : http://code.google.com/p/er9x/

You have much much more on RCGroups, with links to pre-programmed boards (about 40 euros on top of my head) if you want to go this way. Pretty impressives features with the ER9x (and other open source codes for this radio).

Title: Entry Level 2.4 TX
Post by: Keith on October 01, 2012, 13:12:09 PM

Thank you fred