GliderIreland - Ireland RC Forum - Flying Model forum in Ireland

Gliders => PSS => Topic started by: Fred on August 13, 2018, 14:35:00 PM

Title: A-10 Warthog - Something on the workbench :)
Post by: Fred on August 13, 2018, 14:35:00 PM
The urge to glue some wood... And the idea of a new PSS project... But what?  ;D
Title: Re: Something on the workbench :)
Post by: billscottni on August 13, 2018, 19:47:28 PM
Mustang?
Title: Re: Something on the workbench :)
Post by: Jonzjob on August 13, 2018, 21:18:36 PM
That looks like a Meatbox canopy. One of the early models. A Gloucester Meteor peut etré

Come on, giz-a-clue!
Title: Re: Something on the workbench :)
Post by: mario on August 14, 2018, 06:50:00 AM
Moi je sais  8)
Title: Re: Something on the workbench :)
Post by: Fred on August 14, 2018, 08:22:32 AM
Sorry John and Bill, not them :)

The pilot give away the era. I have to say, far from my favourite plane era :)
Title: Re: Something on the workbench :)
Post by: rogallo on August 14, 2018, 09:10:59 AM
Pilot looks wrong for a p38 but the canopy is suggesting this???? to me anyway
Title: Re: Something on the workbench :)
Post by: Fred on August 14, 2018, 09:14:26 AM
Actually, the canopy looks closer to a P51D one I think. Or a Meteor.

Ok, pretty much anything with a bubble canopy! :)

The P38 canopy has more frames.
Title: Re: Something on the workbench :)
Post by: Fred on August 14, 2018, 16:14:48 PM
Massive clue!!

The elevator and the color scheme. Should be a bit lighter in color to be scale, but for a prototype, that will do :)
Title: Re: Something on the workbench :)
Post by: angry_muppet on August 14, 2018, 20:05:01 PM
de Havilland Venom  8)
Title: Re: Something on the workbench :)
Post by: Fred on August 14, 2018, 21:54:24 PM
Sorry, no  ;)
Title: Re: Something on the workbench :)
Post by: angry_muppet on August 14, 2018, 22:01:13 PM
The Vamp then, it has to be!  :P
Title: Re: Something on the workbench :)
Post by: Fred on August 14, 2018, 22:06:31 PM
Sorry no  :(

But that gives me some nice ideas! :)
Title: Re: Something on the workbench :)
Post by: johnfireball on August 15, 2018, 01:05:30 AM
A10 warthog?
Title: Re: Something on the workbench :)
Post by: rogallo on August 15, 2018, 07:41:09 AM
I think we may have a winner!!!
Title: Re: Something on the workbench :)
Post by: Fred on August 16, 2018, 07:59:18 AM
Indeed!
We do have a winner! I knew it was too easy with the elevator  :'( Well done John!
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: Fred on August 19, 2018, 17:41:14 PM
A bit of progress today, with the fuselage done!
Next, the wings. Should be quick :)

Really like it now :)
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: mario on August 19, 2018, 17:47:46 PM
Wahou  il est où le mien  8)
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: Fred on August 19, 2018, 19:35:13 PM
Dans ta tête  >:D

Alright, Feck it, finished building the wings after diner!
Covering left to do. Maybe tonight :)
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: johnfireball on August 20, 2018, 23:13:32 PM
Cool. 3D printed fans?
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: Fred on August 21, 2018, 21:31:47 PM
Thanks, they are but badly!
They did not rescale properly but kept them anyway. Once painted, that should do the trick :)

Anyway, covering done!
One massive mistake at the root, did not doubled the rib, forgot, and it warped :(
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: Fred on August 21, 2018, 21:34:28 PM
A couple more.
Now, need to find a scheme for it!  :-\
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: rogallo on August 22, 2018, 09:56:40 AM
Looking good, now for some Guns!!!! lotsa guns


Title: Re: A-10 Warthog - Something on the workbench :)
Post by: orionis on August 25, 2018, 20:40:25 PM
Hello Fred,
Le fuselage n'est pas un peu long en avant du BA?
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: Fred on August 27, 2018, 19:53:08 PM
OOOhhhh, salut Fabrice! :)

Oui, tout a fait, entre 4 et 5 cms, je me souviens plus, par rapport au 3 vues.
C'est qu'il y a du monde derrière le BF! Entre les nacelles et le gros stab + doubles dérives, j'ai allongé un peu le nez pour le centrage.

C'est que le vrai est court du nez car le GAU08 dans le nez pèse presque 2 tonnes!

Ceci dit, il suffit d'enlever un couple pour retrouver la longueur plus maquette, mais pour le moment, ça ne choque pas trop je dois dire. On verra avec la déco, ca fera un peu plus "ramassé" avec je pense.

Bref, on verra après le premier vol :)
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: orionis on August 31, 2018, 20:31:41 PM
OK, j'avais donc bien vu! Je suis ta construction, vivement le 1er vol.
@++
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: mick a on September 03, 2018, 08:17:40 AM
fred it’s got to be a kit 😄😄😄
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: Fred on September 04, 2018, 11:30:37 AM
 ::) ::)Thanks Mick. We'll see after number 2 is built, but number 1 needs to fly first!!  :-\

Anyway, works continue while waiting for a decent weather.
Just have to plug one servo, and do the CofG and we are ready to commit aviation!

Title: Re: A-10 Warthog - Something on the workbench :)
Post by: pascavion on September 04, 2018, 21:06:03 PM
Super ton avion à facettes  :) :) :) tu as reçu ton colis mon gros ?
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: Fred on September 05, 2018, 10:24:39 AM
Je l'ai construit en basse résolution :)

Non, rien reçu ma tafiolle. Ça va les vacances au fait? :)
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: Fred on September 05, 2018, 21:13:38 PM
Ok so, I'm sure you are wondering how I made these wonderful panel lines :)
Kind of a Chinese RTF effect :)

I think I found THE method that will give the "old" way of using a marker a boot.. At least for me! I finally found what I was looking for for a few years, and so far, I never found anybody else who tried, or even mentionned it.

Here is how:

http://www.gliderireland.net/panel-lines-the-lazy-way/

You're welcome!  ::)

Title: Re: A-10 Warthog - Something on the workbench :)
Post by: johnfireball on September 05, 2018, 23:42:25 PM
Woo Fred,
             Coming out of closet. Nail stuff,be buying the gown next.


Title: Re: A-10 Warthog - Something on the workbench :)
Post by: Fred on September 21, 2018, 17:44:37 PM
It was a large closet :)

Anyway, works continues seeing the great weather we are having!

Made the wing pods (oops, forgot about them!)
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: johnfireball on September 25, 2018, 01:23:45 AM
Looking good Fred. it'll be ready for weekend?
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: Fred on September 26, 2018, 10:11:31 AM
Thanks John :)

I'll have it with me, hopefully good for the first flight :)
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: Fred on September 29, 2018, 23:11:10 PM
And she flew!

Non event, a bit on the light side, but looks great in the air.

Happy!
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: Fred on October 01, 2018, 12:30:55 PM
Pour Ronan  8)

Scale sized fuselage  ;)
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: Fred on October 01, 2018, 12:32:03 PM
A bit more of the A10  :-*
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: mario on October 01, 2018, 13:03:38 PM
Hummmmmmmm 8)
Title: Re: A-10 Warthog - Something on the workbench :)
Post by: Andy.Meade on October 01, 2018, 15:01:58 PM
Looks great Fred, well done!  Welcome to the brotherhood of slope Hog drivers  >:D