GliderIreland - Ireland RC Forum - Flying Model forum in Ireland
Misceleanous => For Sale => Topic started by: Fred on June 07, 2022, 21:09:41 PM
-
For sale is my project to make a Crystal glider.
Scale is 1/3 - 5m ws
Let's face it, I will never finish it!
Kit is an original MCM Crystal, number 5 from the molds! produced in 1995!
Included:
Wings: might need a repaint... Or a good clean. The wings are creamish, but that is scale! I would change the wiring, but saying that, it flew for years as is without issues (du grand Benoit as we say... And if you know Benoit... :)) Not in photos, but wing joiner is in also. All servos are in etc of course.
Elevator: Has an impact. Same as the wings, flew like that, not structural at all, just the rudder horn that went into it during transport :(
Rudder
Landing gear: this is an old Fema. Works well, but I never replaced the axle pin for the wheel, just so you know.
Fuselage: Brand new!! This was produced from my original fuselage who saw much better days. Due to the pandemic, the project stopped, so you will need to add the canopy/canopy frame. That can still be bought from MCM in France (http://www.mcmod.fr/). Fuselage is perfect, just need the seams cleaned, that's all.
My Crystal was 12kgs, with that fuselage, you should be around 9 or 10 as a wild guess :)
So, a bit of work, but not that much really (put the wings on, rudder and elevator), and you'll find yourself with a nice 5m machine.
200€
-
SVP.
Merci Fred
-
SVP.
Merci Fred
Like you need more planes! ;) ;)
-
Don't tell Julie!!!
-
Sold to me???
R