GliderIreland - Ireland RC Forum - Flying Model forum in Ireland
Planes => Park Flyers / Foamies => Topic started by: DennisZ on April 24, 2010, 11:48:48 AM
-
here is my BD-5 :)
built according to plans from rcgroups (http://www.rcgroups.com/forums/showthread.php?t=1141686)
(http://farm5.static.flickr.com/4056/4547287545_5c448efa6c_o.jpg)
have not flown yet.
unfortunately, the vector of thrust is pointing bit ahead of CoG
so any attempt to get airborne from the ground makes her digging the grass :(
-
Looks good Denis. :clap:
Try a couple of washers ubder the bottom of the motor mount to adjust the thrust angle :?:
-
So, here is the final product :)
(http://farm5.static.flickr.com/4047/4577260911_223cfb8c23.jpg)(http://farm5.static.flickr.com/4014/4577247413_01c4308deb.jpg)
I had four days long weekend (Thanks to my employer :) ) and have managed to get three days of flying at Phoenix park.
More pictures here http://www.flickr.com/photos/38384993@N04/sets/72157623796385987/
-
Very nice!! Where do you get your foam?
-
Where do you get your foam?
http://www.shop-rc.causemann.de/Depron-EPP_1
bought a full pack (20sq.m) from them back in 2008.
-
Very nice!! Where do you get your foam?
I think Richard Boyd sells depron through his shop
http://www.expressfly.org.uk/shop/index.php?cPath=11&osCsid=236pl4lo0nlbn2us2groevhij2
Has Gediplac & EPP at the moment
-
short video from the past (not edited, only first quarter worth to look at)
[youtube]http://www.youtube.com/v/uRsfqgOIVvY[/youtube]