GliderIreland - Ireland RC Forum - Flying Model forum in Ireland
Techniques => Misc => Topic started by: Fred on November 29, 2006, 09:08:51 AM
-
Hi there,
So, the time has come to present you my CNC machine.
Look scary at a first look, but this is really easy to build if you take care of what you are doing !
The machine is fully built using hollow steel bars (God, that's heavy !), and use a belt system for the driving. Precise to 0.01mm in theory !
Speed ? well, I can cut up to 50mm/s (can do more, but the stepper motors are not following !), but in practice, I cut balsa (any thickness) at 30mm/s and plywood at 10mm/s. You can't go back to the old fashion way after that ! :rolleyes:
(http://gliderireland.modelisme.com/images/cnc/cnc4.jpg)
For more info : http://gliderireland.modelisme.com/cnc.htm
And if you have any questions, don't hesitate ! :)
Fred
-
:shock: Looks great :D . Are you going into kit production :) .
-
Hi Alan,
I think yes :D
I do the Ka3 first, then.. We'll see ! :wink:
Fred