1
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Thermal / Flat field / NIMSA 2024 Thermal Events
« on: March 13, 2024, 18:56:55 PM »
Complete list of all the thermal events NIMSA will be holding in Northern ireland in 2024
https://nimsa.bmfa.uk/calendar
https://nimsa.bmfa.uk/calendar
3
Slope Soaring / FOUND!
« on: September 17, 2023, 16:38:03 PM »
Found the original from the logo. Fully report to follow
4
Radios / servo screws
« on: August 19, 2023, 23:06:43 PM »
Anybody know the size of the servo arm screw ie the screw that holds the servo arm to the servo, for the Corona DS-239MG metal gear wing servo. I need to replace a few that have gone awol!
5
Slope Soaring / Flying Circus, Fiss, Austria
« on: June 22, 2023, 16:55:02 PM »
Some of you know that I'm at this event in Austria. My pics from the first day can be found at: https://www.flickr.com/photos/182968716@N05/albums/72177720309260143
Was a bit quiet but supposed to pick up at the weekend. Sky was a bit grey and looking in to the sun so photos not the best
Was a bit quiet but supposed to pick up at the weekend. Sky was a bit grey and looking in to the sun so photos not the best
6
Slope Soaring / SCORE!
« on: July 03, 2021, 15:49:16 PM »
£40 at the Ulster MAC Car boot sale this morning. 2m Glass fuz, foam wings, Motor, prop & Esc included 
8
Thermal / Flat field / Open Electric Thermal Soaring 2 May 2021
« on: May 03, 2021, 16:14:34 PM »
Open Electric Thermal Soaring: 2 May 2021
We’re back flying!!
Great to be back flying competitive events after the NI Assembly reduced the restrictions on sport. We’d flown for a couple of Sundays for sport (and to get rid of rustiness!). This was to be our first competitive event. The forecast wasn’t promising, but our CD decided we should at least make the attempt. 6 turned out, with a few new models (and more still to come). Unfortunately, David had an issue with his model and didn’t compete, leaving 5 to battle it out in changeable conditions with very patchy lift.
In Rd1, Paul pushed Keith hard and only missing the landing points separated them. Ronnie also had an excellent flight with his Bitsa (Radian wing, Phoenix 2000 fuz)
Rd 2 & 3 followed a similar pattern, little separating Keith and Paul, with Sam showing well in Rd2 and Tommy in Rd3
At the end the result was close, with that missed landing really being the difference maker between Paul & Keith.
We’re back flying!!
Great to be back flying competitive events after the NI Assembly reduced the restrictions on sport. We’d flown for a couple of Sundays for sport (and to get rid of rustiness!). This was to be our first competitive event. The forecast wasn’t promising, but our CD decided we should at least make the attempt. 6 turned out, with a few new models (and more still to come). Unfortunately, David had an issue with his model and didn’t compete, leaving 5 to battle it out in changeable conditions with very patchy lift.
In Rd1, Paul pushed Keith hard and only missing the landing points separated them. Ronnie also had an excellent flight with his Bitsa (Radian wing, Phoenix 2000 fuz)
Rd 2 & 3 followed a similar pattern, little separating Keith and Paul, with Sam showing well in Rd2 and Tommy in Rd3
At the end the result was close, with that missed landing really being the difference maker between Paul & Keith.
9
Slope Soaring / Micro Sinbad Build
« on: April 24, 2021, 12:57:12 PM »
Ralph noticed me mention this build on Facebook and 'told me off' 
for it not being on GliderIreland. Suitably chastened here's what's happened so far.
I've been doing a lot with foam and fibreglass recently and needed to do some woodworking again. Having seen Andrews Pug build I looked at the micros from Angelwing designs. I bought the micro Sinbad, ~£40. Delivered fast and the cutting is brilliant. It's designed for one of the Parkzone boards but after talking to the designer will easily take ultra micro servos which is what I intend to use. Will be covered in Fibafilm held on with Deluxe Maerials Cover Grip.
for it not being on GliderIreland. Suitably chastened here's what's happened so far.I've been doing a lot with foam and fibreglass recently and needed to do some woodworking again. Having seen Andrews Pug build I looked at the micros from Angelwing designs. I bought the micro Sinbad, ~£40. Delivered fast and the cutting is brilliant. It's designed for one of the Parkzone boards but after talking to the designer will easily take ultra micro servos which is what I intend to use. Will be covered in Fibafilm held on with Deluxe Maerials Cover Grip.
10
Events / PSSA Mass Build
« on: March 17, 2021, 13:12:50 PM »
PSSA have rescheduled their Sabre Mass build event. I know of at least 3 being built or finished in the Island of Ireland. Too expensive to travel to Wales, so perhaps we have something that weekend too? (COVID allowing)
https://www.pssaonline.co.uk/2021/03/11/change-of-date-for-sabre-mass-build-event/
https://www.pssaonline.co.uk/2021/03/11/change-of-date-for-sabre-mass-build-event/
11
Slope Soaring / Multiplex wing locks
« on: January 28, 2021, 16:13:22 PM »
Anybody much experience of Multiplex winglocks? Thinking of using them on a project
13
Slope Soaring / We Got FLYING!!
« on: November 08, 2020, 13:29:04 PM »
A few of the members of NIMSA and East Antrim MFC met up yesterday for a little slope soaring. An easterly 12 - 16 suited the Bowl site perfectly and a good couple of (COLD) hours were had!
14
Scale / ASW28 Refurb
« on: October 24, 2020, 17:58:42 PM »
Bit of primer sprayed on the 1/3 scale ASW28 fuselage today. It's shown a few imperfections, so will get a rub down and resprayed
15
Thermal / Flat field / 2m E-PuRES
« on: September 21, 2020, 20:16:06 PM »
electric version of the PuRES launching