961
Scale / Kangaroo.. Australian Glider.. For Alan
« on: July 22, 2006, 14:32:54 PM »
Hi Fred, you have mail. 
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
962
Scale / Kangaroo.. Australian Glider.. For Alan
« on: July 22, 2006, 12:27:54 PM »
Sure. I'll have it for you sometime today hopefully. Looks like a nice glider.
963
Events / R/C Glider Irish National Championships
« on: July 20, 2006, 10:06:22 AM »
What sounds great?
964
Slope Soaring / 35 degrees and some flights... :o)
« on: July 11, 2006, 11:19:12 AM »
Hi Fred. I didn't know you could play the guitare 
. I see from the photos of the event that you won something. Congratulations .
. I see from the photos of the event that you won something. Congratulations .
965
Slope Soaring / Rubi Thermal/Slope Soarer
« on: July 08, 2006, 15:53:04 PM »
Thanks Joe. Here's an update. It Flies!!! . Need only a few cliks of right trim and up trim to keep her flying straight. It flies great, the best glider I have ever flown. Flew her on Wednesday eveing from Lacken. Here's a picture of her in flight. I also have a flim of her (about 40sec) but I'm not sure how to upload it to the wedsite, also the file is to big (about 70mb) not sure how to sompres it with out losing to much detail.
. Need only a few cliks of right trim and up trim to keep her flying straight. It flies great, the best glider I have ever flown. Flew her on Wednesday eveing from Lacken. Here's a picture of her in flight. I also have a flim of her (about 40sec) but I'm not sure how to upload it to the wedsite, also the file is to big (about 70mb) not sure how to sompres it with out losing to much detail.
966
PSS / Lockheed U2r PSS
« on: July 06, 2006, 09:04:57 AM »
Hi Joe. Any progress on the U2. It should make a great PSS plane.
967
Slope Soaring / Rubi Thermal/Slope Soarer
« on: June 25, 2006, 19:03:05 PM »
Almost there. The model is fully covered now. Just have to glue on the V-tail (hopefully straight ), install the radio gear and then balance it. Then hopefully it will be ready to fly.
), install the radio gear and then balance it. Then hopefully it will be ready to fly.
968
Slope Soaring / Rubi Thermal/Slope Soarer
« on: June 20, 2006, 18:20:20 PM »
Thanks Joe. It should go up on a bungee no problem. I flew from a bungee for the first time a week or two ago. Its realy easy to do .
.
970
Slope Soaring / Rubi Thermal/Slope Soarer
« on: June 16, 2006, 18:05:20 PM »
I'll try that thanks. I don't have much to fill anyway so weight wise it should be OK.
971
Slope Soaring / Rubi Thermal/Slope Soarer
« on: June 16, 2006, 17:39:30 PM »
No, the radio gear is not fitted yet. For filler I was going to use wood glue mixed with balsa dust because i'm going to cover the wings in transparent film and the wood glue mixed with balsa dust will hopefully be the same colour as the balsa and not show up through the film. I think Polyfilla is white, but i may be wrong. Only problem is that i think wood glue mixed with balsa dust is not that easy to sand.
972
Slope Soaring / Rubi Thermal/Slope Soarer
« on: June 16, 2006, 16:36:10 PM »
Here are those picture. All the major parts of the glider are complet. All that is left is to fill some spots on the glider where I, err.... missed with the balsa plane . Then it will be ready for covering. The V-tail is just taped on in these pictures. It will be glued on after covering. Then of course after covering I'll put the radio gear in and she's ready.
. Then it will be ready for covering. The V-tail is just taped on in these pictures. It will be glued on after covering. Then of course after covering I'll put the radio gear in and she's ready.
974
Scale / 1/4 scale Ka-3
« on: June 16, 2006, 15:36:00 PM »
WOW :shock: . That nice. The paint job looks great. Will you be selling the plans for the Ka3. I wouldn't mind getting a copy.
975
Slope Soaring / Rubi Thermal/Slope Soarer
« on: June 16, 2006, 13:25:28 PM »
This weekend no. Next weekend maybe. I'll try to get more up to date photos this evening.