Author Topic: Build attempt / learning process  (Read 13249 times)

Joyplanes

  • Newbie
  • *
  • Posts: 7
    • View Profile
    • Joyplanes RC
Re: Build Log
« Reply #45 on: July 20, 2021, 17:32:39 PM »
It's definitely for the slope.

This is all a bit new to me, technique and materials so it is not perfect, but highly enjoyable.

I started by cutting out the fuselage profiles and then using a hotwire to get the rough shape. I then drilled some rods into either end to add strength and make a sort of rotisserie arrangement for later. Filed the rough shape further and then sanded.

That's a nice built, where do you get that foam?

AndyB

  • ISR Club Member
  • Newbie
  • *
  • Posts: 50
    • View Profile
Re: Build attempt / learning process
« Reply #46 on: July 20, 2021, 21:46:50 PM »
I actually got it from a neighbour who was have exterior insulation installed. It was 300mm closed cell styrofoam and was stronger than others I tried. for example, it resisted me poking my finger at it where other foams seemed to compress and collapse. I don't know if it's the best stuff to use, but it was free and worked well for me.

rogallo

  • ISR Club Member
  • Newbie
  • *
  • Posts: 1124
    • View Profile
Re: Build attempt / learning process
« Reply #47 on: July 21, 2021, 10:40:44 AM »
Andy,
  looks great, cannot wait to see it flying on the hills.

R
Spots or no Spots?
Tuff Choice.

AndyB

  • ISR Club Member
  • Newbie
  • *
  • Posts: 50
    • View Profile
Re: Build attempt / learning process
« Reply #48 on: July 21, 2021, 11:01:08 AM »
I've got Mt Leinster for the 28/29 in the calendar, see you then