Misceleanous > Wanted

Lipo charger

(1/2) > >>

stephen.shannon:
Hi All,

The LCD screen is gone on my lipo charger so I'm looking for a replacement if anyone has one for sale?

Thanks

Stephen

IceWind:
Do you require one with balancer?
I have a xPeak 3 Plus from Jamara that I don't use, that thing is brand new and it's a shame it's just collecting dust.

Happy Days:
What style of balance lead connecters does it take Nando?

By the way, Why haven’t we seen you on the Big L for the past three years?! Gone over to powered flight have you?
 (Propellers are for pussies :lol: )

K.

EI1638:
Hi,

I knew there was something familiar about the original post and then the penny dropped. A while ago I had a similar problem with one of my chargers.

I disassembled the offending article and 'reflowed' the solder on the display board connector. If you're sure its the display and are competent with a soldering iron you could try the same. On  my unit the display board was soldered to 0.1 inch pitch pillars, so it was fairly easy.

Not that I've been doing much flying lately, but my charger has behaved impeccably since then.

Chris

IceWind:

--- Quote from: "Happy Days" ---What style of balance lead connecters does it take Nando?

By the way, Why haven’t we seen you on the Big L for the past three years?! Gone over to powered flight have you?
 (Propellers are for pussies :lol: )

K.
--- End quote ---


That's the thing it doesn't have balance leads.
I was using it with a external balancer from Graupner.

That's not fair... I've been flying things with 3 or more propellers... :(
But I do miss Big L, been to go there to make some aerial footage but for that it can't be too much wind. :)

Navigation

[0] Message Index

[#] Next page