Author Topic: 007 JET (Bede BD-5)  (Read 12617 times)

DennisZ

  • Newbie
  • *
  • Posts: 168
    • View Profile
007 JET (Bede BD-5)
« on: April 24, 2010, 11:48:48 AM »
here is my BD-5 :)
built according to plans from rcgroups


have not flown yet.

unfortunately, the vector of thrust is pointing bit ahead of CoG
so any attempt to get airborne from the ground makes her digging the grass :(

billscottni

  • ISR Club Member
  • Newbie
  • *
  • Posts: 1472
    • View Profile
    • http://www.nimsa.co.uk ; www.billscott.org.uk
007 JET (Bede BD-5)
« Reply #1 on: April 24, 2010, 12:07:42 PM »
Looks good Denis.  :clap:
Try a couple of washers ubder the bottom of the motor mount to adjust the thrust angle :?:

DennisZ

  • Newbie
  • *
  • Posts: 168
    • View Profile
007 JET (Bede BD-5)
« Reply #2 on: May 04, 2010, 18:01:55 PM »
So, here is the final product :)


I had four days long weekend (Thanks to my employer :) ) and have managed to get three days of flying at Phoenix park.

More pictures here http://www.flickr.com/photos/38384993@N04/sets/72157623796385987/

Quiet Flyer

  • Newbie
  • *
  • Posts: 1
    • View Profile
007 JET (Bede BD-5)
« Reply #3 on: June 29, 2010, 17:55:34 PM »
Very nice!!  Where do you get your foam?

DennisZ

  • Newbie
  • *
  • Posts: 168
    • View Profile
007 JET (Bede BD-5)
« Reply #4 on: June 30, 2010, 09:47:39 AM »
Quote from: "Quiet Flyer"
Where do you get your foam?


http://www.shop-rc.causemann.de/Depron-EPP_1

bought a full pack (20sq.m) from them back in 2008.

billscottni

  • ISR Club Member
  • Newbie
  • *
  • Posts: 1472
    • View Profile
    • http://www.nimsa.co.uk ; www.billscott.org.uk
007 JET (Bede BD-5)
« Reply #5 on: June 30, 2010, 12:19:23 PM »
Quote from: "Quiet Flyer"
Very nice!!  Where do you get your foam?


I think Richard Boyd sells depron through his shop

http://www.expressfly.org.uk/shop/index.php?cPath=11&osCsid=236pl4lo0nlbn2us2groevhij2

Has Gediplac & EPP at the moment

DennisZ

  • Newbie
  • *
  • Posts: 168
    • View Profile
007 JET (Bede BD-5)
« Reply #6 on: January 08, 2011, 00:41:37 AM »
short video from the past (not edited, only first quarter worth to look at)
[youtube]http://www.youtube.com/v/uRsfqgOIVvY[/youtube]