66
« on: March 29, 2014, 21:25:01 PM »
Hi Roy,
The first Mike Trew plan I built from was a Pilatus and I went for film covering on the fuselage - not entirely successful as the fuselage shape is quite complex and hard to get the film on neatly without having too many joins. Hence on the ASW I went for a paint finish - I glassed the front end and then spent quite a lot of time filling and sanding before applying an undercoat and then several spray coats of paint, sanding lightly between coats. I just used a commercially available spray can. Make sure whatever glue you use for the planks can be sanded easily - otherwise it may be quite hard to get a smooth surface - I used Resin W. Result - still some imperfections but it is a home crafted model and has not popped out of a mold so I am not too worried! Yet to fly it - thwarted by a combination of weather and work.
Best of luck with your build - certainly there is a lot of effort in a planked fuselage but good to have a project like this on the go and the end result is quite satisfying.
Peter