Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - _sOnGoKu_

Pages: 1 2 [3]
31
Just upload the ideo of the first flight of my H102x  ,,  i instal my gopro on it with electrical tape xD

https://www.youtube.com/watch?v=wX_3dxUhXnI

32
i have recived some new Propellers for use they with my Robocat 270, 3 diferent types,  3-blace Nylon , normal Colored ABS and carbon fiber one :)

http://www.youtube.com/watch?v=QbvsosQiqm8

33
Hello friends, this time I want to talk a bit of the last drone that I have and receive, manufactured by JJRC and after take some surprises, worth creating a thread for it.

H23 model is the car-quad or car Dron,
SongoLand Video

Unboxing :
SongoLand Video

At least you can not say no different, with four wheels and four helices, this drone
It is in the middle of two worlds. It is as if the creators wanted to capture design the car of the future but retro style ??
with those blades painted to hapache when on the move makes a very cool effect!



Well, I think that this 60% compared to 40% air land you that I think is more drone that car, although it can
become very fun and even useful on its 4-wheel drive it. If you are someone who like adventure vivi
Unlimited, perhaps this golden land air can serve well to reach the most remote places
you can imagine ...

At night the truth is decked with lights, perfect for those night flights .. with those leds
It is easier for novices like me control the drone, with reference to good lights front and dertas indicating very clearly.

The H23 is the model that JJRC has decided to stand up to other models with similar features such
as Syma X9 or SY 25, which also look very nice!



The construction material is Abs, looks strong and with good finishes, is light, little more than 100g ..
an advantage in maximizing the flight time, which is about 5 minutes per battery.
It takes very common batteries, if you have more drones is likely to be served the same for both, this mounts
750mha but one of the 600 also works perfectly, besides these battery are easy to find to sell,
its price is around 2 euros, so if this is your first drone is a good idea along with buying a set of 4 or 5 m batteries ..
Representing a minimum expenditure and a very good investment, they are also compatible with most drones.

As it behaves in the air?
The flight is undoubtedly the strongest part of this drone, it takes well in any of the 3 modoso flight has ,,
(Slow, intermediate and fast) but it is fast is when I really felt its potential, if not by the wheels
or the aerodynamic shape that has but responds very well and fine movements, it is fast and agile, otherwise
which it has surprised me is the scope of the station, get really far much more than others that I have similar characteristics.


Video first flight:
SongoLand Video

The transmitter, as I am I commented too, think it's exactly the same or if not very similar to that brings sue
JJRC brother H31 with a nice design touch and good handling. All buttons are handy, like the trim to finish tuning.

and on the ground that such?
When we passed downstairs, it's another story, one thing that caught me by surprise, (unlike similar models from other brands, I do not look at anyone (xxx)) is that this
has the "front" fixed, do not use an address to rotate, it does directly controlling the rotation of the wheels wheels do not turn as could be expected, the car for my taste is too sensitive when twist (which makes turning only one of its rear wheels, which gives you maneuverability on the ground that the land this level will not cost you easily reach your destination ..



Well, after to make it run for a while on different types of terrain, I can say that where works best
and defended it on smooth surfaces, asphalt, walkways, etc ..

what in side??
The highlight is 6 Axis Gyro riding inside, guilty of stability that has even a little wind.
Automatic return to home! Return key to have automatic home and of course, pirouettes 360, easily and cleanly can
acrobatics make beautiful even without being an expert at it. The return home, works in the air and on the ground so much !! I was stunned ..

Pros and cons that I encounter:
pros
Which it is a 2 in 1!
Modern design
removable battery very common
easy to drive

Cons
No own camera
(Although brings the function on the remote)
They have no protection propellers
(And that in the rookies above all thanks a lot)


Key Features:
Built-in Gyro:
Material: ABS / PS, Electronic Components
Remote Control: Remote Control 2.4GHz Wireless Channel: 4-Channels
Detailed Control Distance: 200m
Transmitter Power: 4 x 1.5V AA battery
Battery: 3.7V 750mAh LiPo battery
Flying Time: 6 ~ 7mins
Product weight: 0.114 kg
Package Contents: 1 x RC Quadcopter 1 x Transmitter, 1 x USB Cable 2 x Spare Blade, 1 x (Inglés + Chinese) User Manual

Links of interest:
more technical data this drone.
 http://bit.ly/2cN4Ld7

3D printing !?
If you would like to see if there are better available for this drone to print your miso, visit this link:
 http://bit.ly/SongoLand

Want more videos? : http://bit.ly/SongoLand
Buy This drone ?:  http://bit.ly/2cN4Ld7

* Extra gift: This coupon is valid for take off many of the things the RC section. You can use it as many times as you want
Use the code: RC15OFF

34
Hello friends, to day I would like to talk a little of my little nano.

If something makes me see that technology is advancing fast, it's small things like this ..
A few years ago, it seemed impossible that they could cram as much in such a small place.
While this drone is perfect to start at low cost. also a nobb pilot would have a great time with this nano drone.

Intro video:
SongoLand Video

Where to buy? : 👉 http://bit.ly/2cpzJq0

The key point, apart from FVP, is the automatic altitude control that integratesthis drone and works perfectly, and something like that, especially for novices like me, thanks much ..
Since it is known that one of the hardest things when you're starting up is to keep well and avoid being rectified all the time, which significantly increases the battery drain.

This Cheerson CX-10WD-TX
The color model that come to me is a beautiful metallic gray ,, but is also available in gold, silver and pink-red, all very cool and well finished.



The drone is presented in a really cool look (extending sideways) and at the same time, transport box,
The truth that I congratulate the creators of the design looks very authentic and with a quality finish.

Most interesting things about this mini dron .. good weight, as you can imagine is featherweight, less than 20g and considering it has FVP flight, could said that this is one os smaller and cheaper drones in the world, with which you can enjoy this form of simplmente flight with the APP and also your mobile phone ... and if you want to loop the loop you can have a 100% fvp experience with this head mount it will be more than easy!

Video Unboxing:
SongoLand Video

battery
It has a small battery that comes buildin, and could not be removed, yes, you have to wait to reload.
It does not take much, really, being so small, but if you have to wait about 30 minutes and will be fully charged again .. who would like to wait to load again to continue playing? raise your hand .. ahah

it is a battery of 150 mAh Li-Po enough to keep the drone flying about 4-5 minutes which is not bad if you think about all the things that have to endure this battery .. Motors & led drone, feed video camera and wifi module to synchronize lights ,, if you think about it, there are many things .. never ceases to amaze ..



positioning:
He has led lights to keep him in sight in low light. (Blue and red back forward)

video / photo camera
The CX-10WD not need micro SD card as the CX-10C, the captured files are stored in flash memory of the phone that is connected by wifi, you have 4MP camera wifi and fvp, the resolucon at which recording is 720 x 576 pixels, as you can assume it is nothing fancy. But to hang out not bad (and using the spare chamber say that the flight time is reduced) but this good try .. All this comfortably from your mobile with the app.
Recommended its intalacion! (Although you can use the drone perfectly without)



Dron control and command
You can use it from the phone (just does not work well for my fingers xD) in addition to that command brings so cool, that option not see necessary. As I said the transmitter is the box also, so perfect for safely transporting or have it well guarded.

it have 3 modes of flight The speed setting speed is confirmed by beeps as in most of drones.
(1 beep! Beginner, 2 beep! Beep intermediate and 3! Advanced).

To start with the drone, I recommend putting it in beginner mode and gradually going up ..
should not be in a hurry ..
It is fully recommended for indoor flight, you aunquepodras quietly enjoy the outdoors, plus vuenos record videos. (That if windless day)a breath can take it away ...

Video first set up:
SongoLand Video

360 pirouettes!
the "sticks" of command, are also button (if pressed) with them can make pirouettes and a professional look at the controls of this minidron: P

Height Control
Except for some jumps in the first control after take off automatically, everything went well.
The CX-10WD Cheerson-TX is very stable and easy to control even for those with little experience as me.



conclusion:
Now is the best nano drone I've tried so far. It has everything one could wish for, video camera, fvp, transport box is connected the mobile, easy recharge anywhere and best of all, it is super easy to carry ..
have nothing to see with those who have no control height without hesitation ..
this improvement is what makes you make a difference. really COOL!

It is also a plus point that this manufacturer really is getting the batteries, it's easy to find spare parts (blades and engines basically) to have as many models already on the market, deberi not have problem with that.
A drone to be at home and be able fly without any kind of danger ,, i will give it a 9!

Links of interest:
more technical data this drone.
👉 http://bit.ly/2cpzJq0

3D printing !?
If you would like to see if there are better available for this drone to print yourself, visit this link:
👉 http://bit.ly/SongoLand

Want more videos?
First Flight: Almost ready ..
Trailer / intro: Almost ready ..
Buy This drone ?: 👉 http://bit.ly/2cpzJq0

* Extra gift: This coupon is valid for take off many of the things the RC section. You can use it as many times as you want
Use the code: RC15OFF

35
new videos!

Review from the transmitter X102H  Functions and tips!
https://www.youtube.com/watch?v=xHb_1wOjdbo

Battery hack for this great Drone.
if you like to print your one, you can get the .slt ready to print file here:
http://www.thingiverse.com/thing:1728937

https://www.youtube.com/watch?v=BicVPKF1v6E

36
Nice threads, but easy on the ads now...  :-\

Thankyou ! , do you mean it for the Recomended links section? i can edit this section is is not ok.



by the way .. New video first flight :)
https://www.youtube.com/watch?v=eBwjgdSJySU

a gretting

37
Hello friends!
Today I have prepared this thread, to share all experiments and you'd see things that go going to my
 new little. This drone is waterproof! At last I could try .. really had wanted to have it, never before
i had a submersible dorne, and it seems as interesting.

https://www.youtube.com/watch?v=VHBlrQiWrCk

The first thing that caught my attention is the small size. I expected bigger for the photos, but far from that
problem, I see a good advantage. It is portable and fits in anywhere, you can also get wet!



as you see has a simple line, with many bars ventilation and water for easily drain out water and the drone
can re-take flight.
The manufacturer claims that everything is waterproof. even the video camera.
The motors are sealed so that they do shorted are submerged, and also the plate
all circuits.
There is no problem with wetting the LED lights !!



Is not suitable for salt water (safe mind is not the best idea to put it in it), but still, I think it can have your profits.
RTF, just set the protections and legs the drone and you're ready to fly!



A rainy day you fancy flying the drone? the F51 nothing happens , is waterproof and can get wet without problems.
The manufacturer ensures that you can even record video underwater. (That i want to see).

It has an easy and is stable in perfect indoor flight, outside if it's windy (little) It is no longer fun .. also, in future
post in this thread and will comment the tests that go with doing.



 we go with the unboxing !
this F51 MIDDAX brings on everything you need to fly. (RTF)

UNBOXING VIDEO soon!

in the box:
Transmitter
Dron F51
Charger with Cable
two batteries (lasting about 5 to 7 minutes each)
Set spare Propellers
built-in camera
tools
Detailed instruction manual and well explained.

A great point in his favor, and which I decided to buy this, are batteries using very common, and I have other drones,
so that the 7 minutes flight  can be increased easily with a few batteries assured you have a good time.
Also in about 1 hour they are already charged again.



It has a striking color (orange version) perfect for not losing sight in places with high contrast.
plastic fuselage is reistaint to falls, propellers , perhaps because of its small size,   but being such a small drone, it just
does nothing when it falls.
Anyway the F51C brings a set of propellers and parts for when that happens and it breaks or loses some detail ..
much appreciated if you are new to this.



The transmitter , has a distance of 75 meters (approximately), and works in the 2.4GHz range.
It has 3 flight modes, Normal, Headless, and automatic.
The latter mode, not recommended, although it is assumed it has automatic back home, I did not work me any of the 3
times I've tried.
The mode headless, it works acceptably if the drone is near.



what about the camera?
is supposed to be HD quality but as expected is bad enough, the videos are regular quality, and the recording angle is too
 steep and vibrates too much for my taste.

The controls take pictures and videos work well.



Main functions.
3 modes of different acceleration
pirouettes 360
Taking pictures and videos
Automatic back home (do not recommend)
waterproof (you can wash it all down without fear, even dipping)
LED position lights

is floating in water ?? NO !! ,, May be waterproof, but not float,, at the time that flood
  the hull, the drone goes quickly to the bottom,, forget to fly it under water ...
that will not work with this drone .. So if you do not want to lose it, better just landed in places where if there is a problem and
ends at  the bottom, you can easy recover.



In short, it is a fun, affordable and have a good time drone. I recommend it :)







PROS:
sporty and stable flight (interior)
3d flips & pirouettes :)
brings two batteries :)
You can get wet! no problem flying raining or land on water.
full waterproof
Bright LEDs and visible position.
720p camera built-cam (with sound)
Bring a bag to carry


CONS:
The battery compartment is a loose piece (and can easily lose)
HD video camera are not of good quality :(
The manufacturer says you can record underwater,, I have not succeeded. file always goes wrong.




Improvements with 3D printing
As we know, I like to also do some things for my rc.
For this particular model, I thought somehow adapt the chassis to use batteries with more capacity.

Well, these or any other of the things that happen and I have to do with the F51, i will post in
this thread. 
Suggestions for improving this drone welcome, please post any occurrence that you have :)

3D improvements:
big battery adapter




Recomendet Links:

Technical Data of F51 Maddix
3D print inprovements
Unboxing Video
Video del primer vuelo :
Where to see more videos? 
Where to buy it?

Well here I leave it, I hope serve someone.

Thanks for getting here! soon will put new things

greetings

38
Hello friends, this time I will show you the last thing he has joined the pack, with a twist :)
I is the family of X-SERIES, I present my X102H!

https://www.youtube.com/watch?v=1A55RBLDk2k

He was eager to receive it. the truth if does everything it promises look good ... also with
these blades reversed, it seems bad boy has it !!. Well, to the point ...

This I have now in hand, is the new model MJX, the X102H X , the first thing that stands out are its inverted blades,
these blades are big! Almost as much as my phantom.
Never before I fly a drone with inverted engines, looks a bit strange, it seems that the drone is backwards ,,
but it recognizes that looks good!


 
This drone, has 2 different flight modes (L (slow) and H (Rapido)), also incorporates very new to what is usually
quadcopteros this range of functions.

can keep up (with barometer)
can take off and land automatically
You can return to automatic home and more things that story below ..



Another detail to note is its enormous size. We're talking about 50x50cm, nothing small.
I was surprised that your battery is only 7.4V even after mounting and weigh it, I understood
which it is large but lightweight. We will see that such behaves in flight.

EL model X102H X is that comes without camera , (the camera can be purchased separately.
 
in the X104T model The camera comes with the drone **)
It also brings support for gopro or similar. If it appears that this drone is focused more on recording
and photography has pirouette. In fact, I think it does flips and acrobatic turns. Also they mediate app
in the mobile or tablet you can do FVP.
** See Link below



The station is of type (spring centered) you go to the desired height and can release the accelerator.
The control routine returns to center waiting for new instructions. You want to know all functions of command? **
NEXT ** the link below



Well, I think X102H is for who is more interested in the subject photography and videos in pirouettes
 or acrobatics. Hey, by that I do not say that this drone is not fast ,, in its most aggressive mode can reach
be fun, but of course, response is slower than many others, because of the size and elices riding,
and construction itself, I think it could be compared has take curves with a 4x4 xD



let's take a quick look at the features offered by this drone and discuss the most interesting.
Also I left below some links with more information that I have gathered from this model.

Key Features:

Maintains altitude : It does not have GPS, but it has installed a number of components that help you be more stable in flight.
Maintains altitude (acceptably) and its mode of "slow" flight respondecon fine movements. (Good forrecording with the camera)

off automatic : This drone, also takes off and land alone (if you wan to).
With the red button of the controller, one sort pulse to the red buton and motors and lights begin to turn. (But not off take off)
another short press the red button and the Drone take off the ground automatically.

To land, once you have the drone a few meters, if you press the red button again during flight it will land alone.
(You even can control the rolling direction for to control the drone as it descends (In case it was more wind than normal)
Although generally low fairly straight and controlled alone.

automatic return : This function allows you to return the drone (to the transmiter) automatically.
Only it works in headless mode, and is activated by a short press the button beneath red).
Once automatic return, any movement is made in command (up or down)
exit of the autoretourn.  Also if you press the same button it will cancel the order..

6 axis gyro : It provides good stability in flight, both indoors and outdoors. (Days with much
wind, given its considerable size and low weight, it can be a bit more difficult to handle)

LED lights in Dron . When night came and I could see the lights that have led, I was impressed enough. They are very cool lighted eyes
 and went from being a flying frog to look more like an alien ship.








3D printing improvements
Well, as you know, I also like to do some things for my rc. For this particular model,
I thought of adapting the hook that brings to the video camera and there attach a battery pack I have of
same voltage but different size. (Not fit).

I also thought to give a ridge, aahah to terrify the moskitos that is by the way ,,
the velvet and face of "frog" have.

Well, these or any other of the things that happen and I have to do with the X102H, i will share they here in
this thread. suggestions for improving this drone welcome, please post any occurrence that you have :)

3d Improvements:
Crest frightens moskitos
Support larger battery
Gopro support (with protective casing)




Pros and cons
After all, this drone has exceeded my expectations ,, remember that we are talking about a drone
less than 60 € which includes everything you need to put your camera and can record amazing videos.
at less to me, seen in this way, I think it worth buying if you are thinking started in the worldthe drones.

Of course that is far from a drone of € 350, no miracles, but if this MJX x102H solutions and think it isa practical and economical solution.
I had fun flying this drone, you can see the videos I uploaded **
Internet in this thread.

I hope to share some soon.
** See Link below

Pros:
Look different and striking
low price
easy menejo
RTF complete kit
brings some parts
Common Battery (You can use other easily)


Cons:
flight inside
Low weight (for my taste)
gimbal can mejorarase (camera shake)
walking distance control (being FPV should have more range)




Recommended Links:
MJX technical details here: http://bit.ly/2bcJH0p
Video camera for MJX here: http://bit.ly/2boT1Pw
Unboxing Video here: http://bit.ly/2baYG7H
Functions of the station MJX here: coming soon ..
Video first flight here: coming soon ..
Where to see more videos? here: http://bit.ly/SongoLand
Where to buy here: http://bit.ly/2aT0kw0
Where to buy camera included here: http://bit.ly/2bdWX6n

Well here I leave, I hope you serve something to someone.
Thank you very much for getting here! I hope soon to put new things ..
a greeting

39
You need insulation under those esc's they can short through the carbon frame.

Thanks for your comment! , It is quite right, is that still had not been able to finish the post, my internet is slow and photos and a hard upload.

I put electrical tape, and so far so good. The Power PCB is isolated with a  3d printed piece..

at moment all good,,  touching wood

41
Hi gliderireland friends, I'd like to share my experience in the construction of my first racing drone.
I've never assembled one before, (so everything is a surprise for me) to get started in the world of drones and after make some search, in my opinion this kit is a perfect base for it.

In this thread i will adding the 3D printable improvements that go specifically designed for this model all ready Done:

3d Power PCB Support model
www.thingiverse.com/thing:1657632

Future improvements:
Led light for Tail / Nose, Camera Supports ,GPS Supports, Battery holder



This RoboCat 270 kit has been courtesy of Gearbest guys, one serious and very big website were  you can both for setting up your DIY drone or to get yours already assembled from factory and soo on.  Thank you all you guys!!  you are Awesome!!



Back to the drone , this thread includes actually all you need for assemble your Drone.
here you can see the components i use in this project and all the tech spec:

Carbon fiber Quadcopter Frame
Marspower 2204 Motors x4

Propeller 5030 x4
CC3D flight controller
power distribution board
Lipo LiFe Low Voltage Buzzer Alarm
12A motor ESC

Battery 2200mAh 11.1V 30C Lipo
Transmitter
Charger compatible
kit with some parts

i get all parts for this build here.
http://bit.ly/2b3l5ap




This RoboCat feels very balanced from beginning, against other equivalent others, this has very good reputation for its fine stability of flight and response. Easy to drive and assemble in a simple beautiful line. For all that reasons it has been selected to start this project.


Also is fully upgradeable one of the things because i love it.
This means little by little you will be able to add more things to your drone, to leave it as you like... GPS, FPV, 3D Print improvements, etc..

Carbon fiber chassis feels rugged, lightweight. It has a thickness of 1.5mm thick fuselage and 3mm thick arms for better support the power from motors .
In the videos you can see a fast assemble and all parts received in a single pass.



Hardware is very easy to identify it comes with not instructions, but however leave an image that came to me very well for the Assembly of the Robo.


Patience at the time to assembly It is also recommended, above all if it is the first time that you mount something, you do it somewhere quiet, with enough space to see all parts and work in a comfortable area.

I had never build one before and it took about 30 hours (counting tests and other surprises along the way).

I don't think that required any technical special knowledge to come out all right, perhaps more complicated for some of the mounted, may be it welds with Tin (but is very easy with a little of practice)

Here you can see clearly as they have to go the engine welded to the ESC, so two rotate in clockwise direction and the other two to the contrary.



These engines can get to spin very fast, certainly for this drone are more than enough. A touch of throttle and shoots out the drone.

The advantage of these motors and brushless is that friction is minimal. Which translates into better performance and less maintenance.

I've see that many of the people who assemble this kit say that power PCB, does not work for this model.

This is not entirely correct, I've been able to fit it perfectly, including the two frames carbon fiber which includes the chassis.

The trick is cut to size. This Power PBC is also made as an octocopter, (but we are not going to use those connections) Then the best way to go is cut.





To secure the power PCBto the chassis, I designed a piece that fits perfectly with this board model and fixed with screws to the chassis of the RoboCat.



On the next floor of the drone, we have the battery compartment, I've chosen one of 30C / 3S, giving power for 10 or 12 minutes of flight.

 In future 3D improvements shure i make some support for quick battery replacement.

 

The only problem that I found when installing the control flight CC3D, is that I was able to integrate the anti-vibration support that comes in the Kit.

A layer above, we have the CC3D, has captivated me, super simple to set up, has been to connect it by usb to the ground station, and in less than 10 minutes to have everything set up and ready to fly.



Think it is advisable to protect from vibration everything we can this Board, but I have been unable. At the end what I did was stick it to the middle frame, as shown in the  videos:




The software of this flight controller is based on "librepilot" open source so it is perfect to configure it as you need.

Depending on your level of rider, you can start softer and not broke your drone while learning to fly.

once you already take more esperience is going to be easy to modify the parameters of your Robocat and load more aggressive flight configs on your CC3D board.

For more information about Librepilot see this link



Connected to the CC3D I have the receiver and Transmitter Sky Fly FS T6, with a simple wiring per channel and protected by the external housing feline line from this model.


On the right side, I had to drill a little the side plastic protection, since it could not connect the ESC drivers.

In my conclusion, this drone i believe that it can make dreams reality of anyone interested in started in the world of the drains with a serious model and quality.

Not be mistaken when I say is also a drone for starters, this dorne has a RACING spirit in all parts of his body and configured in an aggressive flight mode, it can be very very fast..

I have learned to fly dornes with it , i steel no too much good, but 100% recommend for start, is easy to Fly and config.
I can help with the basic configuration from the Transmitter and the CC3D flightboard.

Message me if you have trubles.

-------------------------
Here you can se the unboxing video
https://youtu.be/LJq7mdTUleA

Here a Timelap from the construction
https://youtu.be/4ICdwr_xD8o

Thanks for watching!

42
Misceleanous / new around here
« on: August 11, 2016, 01:59:32 AM »
hello friends, I am new community, i have some drons and quadcopters, also recently I started with RC boats, I am very happy with it.
There are some thread to introduce yourself? because I have not been able to find it around the forum..

just wan to sey hello gliderireland!!!

regards

Pages: 1 2 [3]