GliderIreland - Ireland RC Forum - Flying Model forum in Ireland
Planes => Sports => Topic started by: IceWind on March 31, 2008, 00:12:08 AM
-
Ok this kit has been with me for quite some time, but i decided to bring it here and here and finally start to build it.
I will not show the supposed final aspect of it, so that way if i do some mistake no one will notice. 8)
Starting to assemble the wing frame.
(http://www.gliderireland.net/forum/images/uploads/IceWind/P3300987%20%28Custom%29.JPG)
All the parts of the wing frame.
(http://www.gliderireland.net/forum/images/uploads/IceWind/P3300989%20%28Custom%29.JPG)
Build of the nose, yes this plane has a nose too.
(http://www.gliderireland.net/forum/images/uploads/IceWind/P3300991%20%28Custom%29.JPG)
Detail of the nose, those two parts on the photo will hold the third one that is mean to give support to the nose wheel. Steerable!
(http://www.gliderireland.net/forum/images/uploads/IceWind/DSC00085%20%28Custom%29.JPG)
Side nose covering, some thin balsa is used to cover the sides. On those holes will pass a CF tube and the servo wires.
(http://www.gliderireland.net/forum/images/uploads/IceWind/DSC00084%20%28Custom%29.JPG)
Final look of it today. Still alot to be done.
(http://www.gliderireland.net/forum/images/uploads/IceWind/DSC00086%20%28Custom%29.JPG)
During the transpost to Ireland some weaker parts got broken. :( So i had to improvise and fix them.
(http://www.gliderireland.net/forum/images/uploads/IceWind/DSC00089%20%28Custom%29.JPG)
Oh, and the rudder. I started by building this one and i almost forgot the photo of it. Well actually is the vertical stab because there will be no rudder on this plane.
(http://www.gliderireland.net/forum/images/uploads/IceWind/normal_P3260981_%28Large%29.JPG)
-
Looking good Fernando ! :clap:
And nice set of tea cups too ! :P :D
-
Thanks Fred.
Just a little correction those are not mine!
They are Expresso Cups, Ana brought them from Portugal because here coffee is drink in buckets! :)
-
Looks like a very interesting model Fernando - look forward to seeing it in the air!
-
So Fernando, what's the story with this wing ? :?:
-
Well unfortunately work hasn't left much free time lately.
But i have progress on that.
I'll post some photos, it's still not done i was going to the part i have to sheet part of the wing with really thin balsa.