Author Topic: grunau baby 11b (mark 2)  (Read 17763 times)

gerryb

  • ISR Club Member
  • Newbie
  • *
  • Posts: 445
    • View Profile
grunau baby 11b (mark 2)
« on: February 06, 2014, 22:34:55 PM »
hi all, i,ve been doing a bit of building lately, one of fred's grunau baby 1/4 sc semi kits to be exact.

he decided to use a different wing section on the wing for slope soaring and suggested i might build it and see see how it would work out.

as usual with fred's designs, it goes together very quickly and everything fits nicely together.

he and mario (ronan) have full build logs of the model with the original wing, so here's a few photos of mine with the new wing (spot the difference)........





fred supplies a servo tray which fits behind the cockpit floor, but i like to have my servos 'getatable', so i'll fit them here instead.



i like to build both halves of the wing at the same time, so i cut the plan and just did everything on the double.



 this is where the airbrakes will go. i'm working on them separately until i'm happy with how they work.



 this is where the a/b servo will fit. i'm using a couple of hi-tec 82mg.

more photos later, soon as i can drag myself away from the building board

Fred

  • Slope Soaring is not a crime!
  • Administrator
  • Newbie
  • *****
  • Posts: 5119
  • Gliderist Simplex
    • View Profile
    • http://www.gliderireland.net
grunau baby 11b (mark 2)
« Reply #1 on: February 07, 2014, 07:49:03 AM »
Nice one Gerry!  :clap:

As usual, flawless and clean build  :clap:
Education is important, but flying RC planes and gliders is importanter!

billscottni

  • ISR Club Member
  • Newbie
  • *
  • Posts: 1456
    • View Profile
    • http://www.nimsa.co.uk ; www.billscott.org.uk
grunau baby 11b (mark 2)
« Reply #2 on: February 07, 2014, 15:15:48 PM »
Very nice Gerry

andrew wallace

  • ISR Club Member
  • Newbie
  • *
  • Posts: 593
    • View Profile
    • http://www.bmfc.btinternet.co.uk
grunau baby 11b (mark 2)
« Reply #3 on: February 07, 2014, 15:43:32 PM »
:clap:  :clap:  :clap:  :clap:
love those ribs pity you have to cover them up  :D
i\'m an ordinary man nothing special nothing grand

mario

  • phpBB moderator
  • Newbie
  • *
  • Posts: 1336
    • View Profile
grunau baby 11b (mark 2)
« Reply #4 on: February 07, 2014, 17:45:31 PM »
:clap: good job
si t as pas d amis, prends un curly

gerryb

  • ISR Club Member
  • Newbie
  • *
  • Posts: 445
    • View Profile
grunau baby 11b (mark 2)
« Reply #5 on: February 11, 2014, 20:05:53 PM »
thanks lads

gerryb

  • ISR Club Member
  • Newbie
  • *
  • Posts: 445
    • View Profile
grunau baby 11b (mark 2)
« Reply #6 on: February 21, 2014, 22:39:43 PM »
grunau is progressing nicely............


i left the rear end open until i've connected the elevator control horn...



first proper look at all the bits assembled.....


airbrakes built, painted and installed.....


and up close...


that wing really does look nice 'in the bones'....!



next up, sheet the wings and make some struts

Fred

  • Slope Soaring is not a crime!
  • Administrator
  • Newbie
  • *****
  • Posts: 5119
  • Gliderist Simplex
    • View Profile
    • http://www.gliderireland.net
grunau baby 11b (mark 2)
« Reply #7 on: February 21, 2014, 22:58:07 PM »
WOW!  :clap:  :clap:  :clap:

Now that is looking really good! :clap:  :clap:
Education is important, but flying RC planes and gliders is importanter!

gerryb

  • ISR Club Member
  • Newbie
  • *
  • Posts: 445
    • View Profile
grunau baby 11b (mark 2)
« Reply #8 on: February 21, 2014, 23:06:39 PM »
thanks fred.

and your vimy looks the biz too!  by the way, the 2nd programme of the history of aviation is on next thursday night.  i missed the start of last night's prog,  did they show the vimy?

Fred

  • Slope Soaring is not a crime!
  • Administrator
  • Newbie
  • *****
  • Posts: 5119
  • Gliderist Simplex
    • View Profile
    • http://www.gliderireland.net
grunau baby 11b (mark 2)
« Reply #9 on: February 21, 2014, 23:12:24 PM »
Thanks Gerry  :D

Recorded it, as one of the girl got sick as I was watching it  :(
Did not had time tonight, I'll watch it tomorrow, but the Vimy is not featured in the documentary for sure, as it was only made for the World Premiere  :D

But President Higgins  and the CEO of Boeing saw it  :lol: (and got some nice words about it  :D ) Still have to get these pages about the Vimy done  :!:
Education is important, but flying RC planes and gliders is importanter!

gerryb

  • ISR Club Member
  • Newbie
  • *
  • Posts: 445
    • View Profile
grunau baby 11b (mark 2)
« Reply #10 on: March 31, 2015, 15:48:40 PM »
update on grunau baby.

i ran into some bother last year while working on the air brakes. clumsy fingers and fairly delicate pivot arms don't go well together.  i had the a/b's working nicely, then i dropped a screwdriver into the  a/b well and while getting it out, i broke one of the pivot arms. 'oh dear' is a polite version of what i said!!!  i tried to make new ones from birch ply which were stronger, but they were never quite right.

so the whole build ground to a halt for months until a friend of mine made me a set of arms from aluminium exactly as per the originals. problem solved.

now i was back on track,  building was resumed and in the space of a few weeks the model was finished and covered.

at the moment i'm putting on the primer coat of paint, so should be gloss coating soon.  the colour scheme is basically white with some coloured trim.  my problem has always been paint creeping under the masking tape and causing all sorts of grief.  if anyone can suggest a better type of masking tape or technique, i would be delighted to hear from you.

a few photos of the gb as it is parts of the a/b's
parts in place
parts ready for assembly
and ready for painting


Fred

  • Slope Soaring is not a crime!
  • Administrator
  • Newbie
  • *****
  • Posts: 5119
  • Gliderist Simplex
    • View Profile
    • http://www.gliderireland.net
grunau baby 11b (mark 2)
« Reply #11 on: March 31, 2015, 21:24:51 PM »
That looks fantastic Ger!  :clap:  :clap:  :clap:
Just can't wait to see it finished and in the flesh  :clap:  :clap:

(on a side note, the A/B arms are in 2mm epoxy now)
Education is important, but flying RC planes and gliders is importanter!

gerryb

  • ISR Club Member
  • Newbie
  • *
  • Posts: 445
    • View Profile
grunau baby 11b (mark 2)
« Reply #12 on: March 31, 2015, 23:55:32 PM »
thanks fred, epoxy is a much better idea

EI1638

  • Newbie
  • *
  • Posts: 129
    • View Profile
grunau baby 11b (mark 2)
« Reply #13 on: April 01, 2015, 00:06:58 AM »
Hi Ger,

I am absolutely no expert at painting, but I found that Tamiya masking tapes improved my edges  enormously. Tight curves are still a major challenge for me, but gentle curves and straight lines are now almost pleasant to mask off and paint.

Maybe someone who is better at painting can chime in here.

In case anyone is wondering - finishing models is the part of the build I dislike most, and I reckon it shows.

Chris

gerryb

  • ISR Club Member
  • Newbie
  • *
  • Posts: 445
    • View Profile
grunau baby 11b (mark 2)
« Reply #14 on: April 01, 2015, 00:29:53 AM »
thanks chris, appreciate that.

where can i get tamiya tape? my lines are straight, so that tape could be exactly what i need