Techniques > How to...

Connecting wing servos en-mass

(1/4) > >>

Happy Days:
Not so much a problem as an annoyance, every time I take my Phase 6 to the slope and assemble the wings to the fus. I have to connect four separate servo cables. 2 for the ailerons and 2 for the flaps.

On more than one occasion I’ve fitted the wing only to find one (or more) of the servos has been connected up wrongly, EEERrrrrrrr. :evil:

Where can I get a single connector that would enable me to connect all the wing servos at once and be sure they are all connected correctly? :?

Keith

DennisZ:

--- Quote from: "Happy Days" ---
Where can I get a single connector that would enable me to connect all the wing servos at once and be sure they are all connected correctly? :?

--- End quote ---


Hi Keith,

I am using these http://brchobbies.com/?page=shop&action=additem&item=1032
for my Spirit.

In theory you may fit four servos into one 6pin connector.

added:
found the picture
http://static.rcgroups.com/forums/attachments/2/3/6/5/5/a346038-46-wiring%20harness%204.gif?d=1101278566

Happy Days:
Brilliant Dennis! That’s exactly the type of thing I’ve been looking for. :clap:

Many thanks for your info. :D

Keith

Fred:
Hi Keith,

You can also use DB9 plugs (for computers), easier to solder IMO, but much bigger!

Happy Days:
Er?…….DB9 plugs :shock: …….IMO? :shock:  :shock:

You forget Fred, I’m a total nerd, (or Geek, I can’t remember which :oops: )!

What does IMO stand for, :!:  and where could I get a DB9 plug? :?:

Love and kisses,

Keith

Navigation

[0] Message Index

[#] Next page