GliderIreland - Ireland RC Forum - Flying Model forum in Ireland

Gliders => Scale => Topic started by: billscottni on November 01, 2009, 16:47:43 PM

Title: Astir CS Mould Build
Post by: billscottni on November 01, 2009, 16:47:43 PM

As we didn't get to fly today, I've been doing a bit of surfing, (wet enough on the bloody hill to surf!). Came across this Spanish site with a photo montage of building a  mould for an Astir CS

Enjoy  :D  :D

http://aeromodelismoextremadura.jimdo.com/nuestros-aviones/astir-cs/

Title: Astir CS Mould Build
Post by: Fred on November 02, 2009, 09:00:33 AM

Hi Bill,

Here is the French Bible about molding fuselage :

 Building a plug (http://lesgpr.free.fr/construire/jp15-36/jp15-36_master.htm)

 Making the mold (http://lesgpr.free.fr/construire/jp15-36/fab_moule1/fab_moule1.htm)

 Molding a fuselage (http://lesgpr.free.fr/construire/jp15-36/fuso_fab/fuso_fab.htm)

 Everything about making foam/venner wings (http://lesgpr.free.fr/construire/aile/exp-coffre/exp-coffre.htm) Different techniques on top of the page

Composite sheeting wings (http://lesgpr.free.fr/construire/sb10/sb10gw/sb10gw.htm)

And much more here : http://lesgpr.free.fr/accueil/guide.htm

The GPR website, a must see ! All in French, but Google translator do a decent job.

Title: Astir CS Mould Build
Post by: Alan_Perse on November 02, 2009, 10:06:29 AM

Thanks for the links lads. They should of use in the future. I would love to build a Standard Cirrus or Open Cirrus some time in the future.