Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - andrew wallace

Pages: 1 ... 31 32 [33] 34 35 ... 40
481
Scale / ASK-13
« on: April 30, 2011, 14:11:24 PM »


ok guys the dihedral is measured in degree's and minutes so the measurement is 3 degree's 30 minutes which works out at 3 1/2 degrees  :lol:  :lol:

thanks to GEEW from www.scalesoaring.co.uk for explaining it  :clap:  :clap:

482
Scale / ASK-13
« on: April 29, 2011, 20:12:28 PM »
doubt i'll have to drink a few more beer and think about it  :lol:  :lol:
but what you're saying keith makes since  :clap:
and i never thought of that
i've asked the same question on www.scalesoaring.co.uk
so it will be interesting to see if you're right keith  :?:

483
Slope Soaring / Easter Holiday flying.
« on: April 29, 2011, 19:57:21 PM »
ha Happy Days  \:D/  \:D/  \:D/  O:)

484
Scale / ASK-13
« on: April 29, 2011, 19:23:47 PM »
hey a big thanks to william and kate for today the day off i got the wing spars made and got the ribs all sorted

there's 27 ribs and the spar is made out of 1/8 spruce ,there is 3mm of wash out at the start of the aileron and 9mm at the tip

only thing that's bothering me at the moment is the dihedral

is that 3 degree's or is it 3" at the tip  #-o

485
Slope Soaring / Easter Holiday flying.
« on: April 29, 2011, 19:02:02 PM »
ooooooooooooooooooooooooooooooooohhhhhhhhhhhhhhhhhhhhhhhhh
that fox looks good as does john's  :clap:  :clap:  :clap:

i'm looking forwards to a flight on it even if it is on mode one

hey fred and keith if you are coming up tomorrow i would have loved to be there but i work on a saturday till 1.30pm and by the time i would get to moneymore it would be near 3pm
can you not come on monday  :D

486
Slope Soaring / Easter Holiday flying.
« on: April 29, 2011, 08:21:24 AM »
sundays out for me as john says it's a family day  :D
so i'll make up for it on monday  :clap:  :clap:

487
Slope Soaring / Easter Holiday flying.
« on: April 28, 2011, 15:02:43 PM »
i'll go on monday  :clap:  :clap:

488
Slope Soaring / Easter Holiday flying.
« on: April 27, 2011, 15:34:43 PM »
:clap:  :clap:  :clap:  :clap:

a good day out

489
Slope Soaring / Slope Fest NI
« on: April 18, 2011, 13:49:03 PM »
:clap:  :clap:  :clap:  :clap:

good stuff  :D

490
Slope Soaring / Slope Fest NI
« on: April 17, 2011, 18:31:09 PM »
keith we had another great day today  :D
the lift today was coming and going i flew my electric model and when the lift died the thermals where great even john with his thermal model had a good few flights  :D

i'm sure richard will post a few photo's later

the sausages where great i reckon in the last two days i've eaten a packet on my own  :lol:  :lol:

roll on the next big slope event   \:D/

491
Slope Soaring / Slope Fest NI
« on: April 17, 2011, 07:41:48 AM »
good days flying yesterday :clap:  :clap:
looking forwards to getting back today again  :lol:

492
Slope Soaring / Sloping on the Mourne Mountains
« on: April 13, 2011, 11:25:55 AM »
good man keith  :clap:  :clap:

493
Slope Soaring / Sloping on the Mourne Mountains
« on: April 11, 2011, 16:32:22 PM »
looks like a good day  :D
i was scoring brownie points  :lol: so i'll be able to get away this weekend  :clap:

i have the big cub fixed after an unexpected gust of wing through it over when landing and i just broke the wing tip so i was lucky  :clap:

hope the wind stays westerly in this part of the country  :)

494
Scale / ASK-13
« on: April 07, 2011, 16:44:39 PM »


i've made a hatch here so i can get at the servo's, reciever and the battery  the wing joiner will be here as well  :D

495
Scale / ASK-13
« on: April 07, 2011, 16:39:58 PM »


ok Sam a few more pictures of the K13  :D
it's finally all sheeted now
i recieved a box of plywood and spruce from the balsa cabin at the end of last week so i'll be ready soon to start the wings

i've done the inside of the fuselage with fibre glass resin to add a bit of strenght
the sheeting is 1/16 balsa and i'm scared when the model is finished of putting my fingers through the bottom of the fuselage  :!:

Pages: 1 ... 31 32 [33] 34 35 ... 40