Author Topic: free FW-190 fuz (used) (Read 5156 times)

DennisZ · « **on:** December 20, 2009, 15:45:33 PM »

Hi ALL,

if anyone interested, I have old fuz for PKZ FW-190 - used, but in acceptable condition.
Will give it away for no charge.

Dennis

joe · « **Reply #1 on:** January 02, 2010, 23:44:45 PM »

Do you have the other bits? Stab, canopy etc...
Why not build a new wing and make yourself a PSS FW-190!?

DennisZ · « **Reply #2 on:** January 03, 2010, 00:05:07 AM »

Quote from: "joe"

Why not build a new wing and make yourself a PSS FW-190!?

Hm ... yes, I still have most of bits and pieces .
was not thinking of PSS - it does not look much 'air penetrating' .

joe · « **Reply #3 on:** January 03, 2010, 20:06:50 PM »

If you mean the big fat nose I don't think it would cause too much of a problem really. Just put a glider type profile on the wing. RG14, MH32, S3021 etc..
Just an idea Dennis. I think I'll do the same with an old electric spitfire I have.

billscottni · « **Reply #4 on:** January 03, 2010, 21:22:58 PM »

Dennis,

Plenty of Hellcats, Corsairs etc flying in the States. As Joe says, fit it with a glider wing and it should go fine

News:

Author Topic: free FW-190 fuz (used) (Read 5156 times)