Author Topic: Foam repairs  (Read 4278 times)

stephen.shannon

  • Newbie
  • *
  • Posts: 163
    • View Profile
Foam repairs
« on: August 12, 2013, 23:35:07 PM »
Hi all,

Just looking for some pointers to get a beaten wing leading edge to straighten? Big Keith was saying you can use steam or heat but just wanted to get. Step by step guide to making the repairs.

Thanks

Stephen
Our deepest fear is not that we are weak but that we are powerful beyond measure..... Marianne Williamson

Fred

  • Slope Soaring is not a crime!
  • Administrator
  • Newbie
  • *****
  • Posts: 5121
  • Gliderist Simplex
    • View Profile
    • http://www.gliderireland.net
Foam repairs
« Reply #1 on: August 13, 2013, 15:14:45 PM »
Smart Keith is right  :D
Boiling water gives good results, but be aware that the foam will come back up to a certain point (we are talking about EPP right?)
Education is important, but flying RC planes and gliders is importanter!

stephen.shannon

  • Newbie
  • *
  • Posts: 163
    • View Profile
Foam repairs
« Reply #2 on: August 14, 2013, 20:38:22 PM »
Yea its epp alright
Our deepest fear is not that we are weak but that we are powerful beyond measure..... Marianne Williamson

stephen.shannon

  • Newbie
  • *
  • Posts: 163
    • View Profile
Foam repairs
« Reply #3 on: August 20, 2013, 09:27:36 AM »
Well the steam works great, it does fix most issues with beaten up wing edges but alas,..... can't fix holes unfortunately.
Our deepest fear is not that we are weak but that we are powerful beyond measure..... Marianne Williamson

Happy Days

  • ISR Club Member
  • Newbie
  • *
  • Posts: 2184
    • View Profile
Foam repairs
« Reply #4 on: August 20, 2013, 13:58:30 PM »
No, but Gorilla glue can. Squirt some in the hole, then just sand it down after it’s cured. :D
K.
Try not to run out of airspeed, altitude and ideas....... all at the same time.

stephen.shannon

  • Newbie
  • *
  • Posts: 163
    • View Profile
Foam repairs
« Reply #5 on: August 20, 2013, 15:02:01 PM »
OUtstanding idea I'll give it a lash and see how it goes....
Our deepest fear is not that we are weak but that we are powerful beyond measure..... Marianne Williamson