Thanks Anthony ! Me too !!
A step closer now !
So, after a long break, this week end was Ka3 time !
The fuselage is now finished, and need to be covered.
Some detailing has been done and need to be completed (a few details like the harness, control yoke etc etc)
![](http://www.gliderireland.net/forum/images/uploads/Fred/vuecockpit.JPG)
![](http://www.gliderireland.net/forum/images/uploads/Fred/vuepanel.JPG)
The paint is a spray "stone effect" from the local DIY shop. Great effect, and hide all the defects ! :oops:
The struts support on the fuselage were also glued. Made from 1.5mm aluminium. I also made some guides for the pushrods... The servos are in the cockpit, and it's a bit of a long way to get to the V-Tail !
And here is the beast, ready for covering (after the building jig is removed ! Very handy to have this to work on the fuselage...)
![](http://www.gliderireland.net/forum/images/uploads/Fred/fuselage.JPG)
Next, the wings !
Servos, wirering and covering... Getting there !
Fred