Some pics to prove I've actually started building:
Couple of the KA3 wing and the pilot from AH Designs
The Jart fuselage at the filling stage. I get it as close as possible using epoxy and filler, then paint with emulsion and sand and paint until I get a nice finish. Fuz shape done using the lost foam method.
The area around the wing seat is strengthened with carbon tape.
Finally for now, the fuz for the 2.5 - 3m slope soarer. It's a nose cone type and I built an internal "keel" for it, again using the lost foam method.
This fuz has a "plain" end to it ie no fin. Still undecied as to V or T tail, although I'm swaying towards T. The wings will be done when I get the CNC machine finalised